HAN4880 Hangar 9's Jackal 50 ARF
Hangar 9's Jackal 50 ARF is an exciting, strikingly good looking model
with real jet looks for modellers
who feel the "need for speed."
The plane's key feature is just that, the stunning speeds it attains
and the exceptional flying characteristics
that it maintains while getting there.
This dynamic jet model is ideally powered by .52 - .60 size two-stroke
engine and for added performance
a tuned silencer pipe may also be used for added convenience allowing
for a wider range of engine
installations if you want really serious performance.
The included assembly guide and comprehensive hardware pack make fitting
either power option easy.
The Jackal 50 comes with many included features that not only give the
model great looks but “clean-up”
the model in the air helping it to fly smooth, crisp and above all, fast!
Some of the many features of the Jackal 50 include a beautiful balsa
and plywood fuselage with a pre-painted
top hatch, exhaust nozzle, built up balsa-plywood wing and tail plane
covered with matching red and
white Ultracote, internal control linkages that add to the attractive
looks of the jet as well as allowing for
maximum performance, flaps for enhanced take off’s and landings and a
clear canopy with painted pilot
figure.
Gear doors enhance the overall look of the model whilst the high-visibility
colour scheme helps enormously
with orientation at high speed, and thanks to the tricycle landing gear
with steerable nose leg the jet can be
flown comfortably from cut grass landing strips with ease.
For those that want the best in scale looks and performance the model
may also be fitted with optional r
etracting landing gear that has been specially designed by Robart (HAN501
or HAN502 – sold separately)
for the Jackal 50 providing a simple “drop in” installation.
For pilots looking for a fast performance-based model without the expense
of running a true turbine or
ducted fan model, the propeller driven Jackal 50 Sport is the perfect
solution.
Key Features
- Perfect match for Evolution™ .60NX with a
high-performance muffler
- Airfoil optimized for speed and stability by
George Hicks
- Sheeted foam core wing
- Airfoil-shaped vertical and horizontal
stabilisers
- Light balsa/plywood construction
- Painted top hatch with clear canopy
- White CNC aluminium spinner included
- Factory-installed flaps
- Pre-hinged and control horns preinstalled except the
elevator which must be hinged by the modeler
- Robart pneumatic or mechanical retract ready
- Painted fibreglass cowl
- All necessary hardware included
|
| Tech
Spec |
| Wingspan |
1600mm (63.0 inch) |
| Length |
1420mm (56.0 inch) |
| Wing area |
445 sq dm (690 sq inch) |
| Weight |
3.4 – 3.8 kg (7.50 – 8.25 lb) |
| Radio |
5+ channel with 7 servos (6+
channel with 8-9 servos if using retracts) |
| Engine Size |
.52 - .60 2-stroke (small case
required) |
|
