|
Hangar 9 not only
manufacture superb model aircraft, they also manufacture tools
and modelling aids to an equally high standard. Tools built using
the very best materials, and designed for ease of use and long
life. |
|
| |
 |
|
A voltmeter capable of precision voltage
testing of transmitter and receiver batteries.
It can also
be used for testing batteries under servo load for accurate
readings. Two
scales; 4.8 or 9.6 volt, for use with both
transmitter and receiver packs.
|
| |
 |
|
The new Digital Voltmeter Tachometer (DVT™)
is essentially two products in one.
Incorporating a built-in
load the voltmeter can be used for measuring voltage for all
transmitters and receiver packs (JR and Futaba) and the tachometer
for comparing
engine performance, setting needle valves and checking
other performance
variables.
The tachometer is capable of reading 2, 3 and 4-blade propeller
rpm from 0 to 29,000
in 10 rpm increments and the unit automatically
switches off after two minutes if not in
use, extending the life
of the included 9v battery.
The Voltmeter reads voltages from .5-16 volts and includes a
built in polarity switch to
measure transmitter voltage of either
JR or Futaba, Sanwa and Hi-Tech transmitters.
Automatic selection
of an appropriate size “load” is placed on of RX
or TX battery packs
plus, a low-battery indicator shows when
the included 9V battery is low. |
| |
 |
|
A factory built and finished field box
that is ready to use straight away. Constructed from
top
quality plywood and finished with high gloss fuel proof paint
it features large capacity
storage compartments, pre-cut
power panel mount, and a large fuel container platform.
With
room to carry tools, fuel and starting accessories, this
deluxe field box is the easy way
to carry all you need for
a days flying.
|
| |
 |
|
Made from high quality steel these Z-Bender
pliers will make professional and accurate
Z-bends quickly and easily each and every time you use
them, rubber coated grips make
these pliers comfortable
and firm to use; a worthy addition to any modellers tool
kit.
|
| |
 |
|
Made from carefully machined plywood this substantial
cradle is a must have accessory
for use either in the workshop
or at the flying field. It features adjustable “jaws” that
can accept
a wide variety of fuselage sizes making assembly of
most model aircraft safe and secure. In
addition to all the hardware
and instructions it also has durable foam rubber tubing that
attaches
to the cradles to minimise damage to the airframe, and
rubber feet to protect the unit from damp
when in use outdoors. |
| |
 |
|
A self-assembly flight box, comprising
die cut and fully sanded plywood parts.
With plenty of space to store essential field items and
a separate drawer for smaller
items, this compact flight
box with also has a built in fuel platform to hold a gallon
of fuel
safely during transit.
|
| |
 |
|
A die cut lightweight plywood airplane
cradle complete with mounting nuts and bolts and foam rubber.
The cradle mounts directly to the Hangar 9 (HAN130) field
box, and can also be used with many others. It cradles the
model securely and makes field assembly of models easier
and safer, reducing the risk of models falling over.
|
| |
 |
|
This fantastic LCD micro tachometer fits
easily in the pocket or flight box, a handy palm sized tacho
that safely and accurately reads rpm and displays results
on the built in LCD screen.
Selectable settings take readings for 2, 3 and 4-bladed
propellers, reading from 0-32.000 rpm and a low power icon
indicates when the battery need replacing.
A 3V-220 mAh-lithium battery is included and an auto shut
off saves battery power when not in use.
|
| |
 |
|
Made from high quality steel these Z-Bend
pliers will make professional and accurate
Z-bends each and every time you use them.
They are designed for easy fuselage access and have a positioning
pin for accurate bends, a built in cutting feature with
a comfortable grip make these pliers a worthy
addition to any modellers tool kit.
|
| |
 |
| |
