| FuntanaX 50 |
|
The FuntanaX 50 is an enhanced
design with structural upgrades that feature a fresh approach
to design and performance resutling in an extremely aerobatic
performer.
Equipped with removable Side Force Generators (SFG’s) the
FuntanaX 50 allows pilots to achieve unlimited success in sport
or 3D flight, performing harriers, blenders, knife-edge, torque
rolls and much more. The SFG’s give extra rudder authority
and control that helps you to perform a virtually limitless types
of precision aerobatics.
Featuring selected balsa and light plywood construction for lightness
and durability the FuntanaX 50 is covered in a vibrant Ultracote
covering with it’s own unique graphics.
Ground handling more than matches the aerial performance thanks
to the longer, lighter landing gear that also provides plenty of
strength for bumpy landings. Extra length also produces extra ground
clearance accommodating a larger electric propeller should you
wish to power the model with an electric motor; the E-flite Power
60-400KV brushless outrunner being an ideal choice. Electric conversion
is easy with just a few basic modifications. A Power 60 motor and
mount will simply bolt straight on to the existing firewall, for
quiet, clean flight performance.
Speedy assembly is assured thanks to the complete hardware pack
and illustrated assembly guide. |
- Precise, 3D aerobatic performance
- Removable Side Force Generators for extreme
rudder authority
- Longer landing gear increases prop clearance
- Can be converted to electric power
- Ultra light all wood construction
- Painted fibreglass cowl and wheel spats
- Dynamic Ultracote covering
- Hardware pack with assembly guide.
|
| |
| |
Wingspan |
142cm (56inch) |
| |
Length |
144cm (56.75inch) |
| |
Engine |
.32-.46 two-stroke or .40-.82 four stroke |
| |
Weight |
4-4.5 lbs (1.8kg-2.5kg) |
| |
Radio |
4 channel |
| |
Wing Area: |
714 sq in (46.1 sq dm) |
| |
Motor Size: |
Motor (for electric conversion) E-flite Power
60 brushless outrunner (EFLM4060A) |
| |
Servos |
5 |
| |
C of G |
129mm–144mm (5 1/16"–5 11/16")
behind the leading edge of the wing. |
| |
Control Throw
(Ailerons) |
Low Rate: 19mm (3/4") (9°) Up, 16mm
(5/8") (6°) Down. 3D Rate: 54mm (2 1/8") (27°)
Up, 48mm (1 7/8") (23°) Down |
| |
Control Throw
(Elevator) |
Low Rate: 23mm (7/8") (11°) Up & Down.
3D Rate: 67mm (2 5/8") (40°) Up & Down |
| |
Control Throw
(Rudder): |
Low Rate: 51mm 2" (51mm) (25°) Left & Right.
3D Rate 98mm (3 7/8") (45°) Left & Right
|
|
|
|
|
