Tango 40 ARF |
| The Tango 40 is unique model
in so much as it looks like a conventional high wing model almost trainer
like, yet the Tango is a very competent sport flyer capable of general
aerobatics combined with the ability to perform 3D aerobatics. This
is achieved by mounting the wing on top of the fuselage to offer a
degree of stability and the wing design itself that features a generous
wing area with enlarged control surfaces for rapid roll rates and a
thick section that generates lift at lower air speeds. Designed using
the latest C.A.D techniques and constructed entirely from balsa and
light ply the Tango is covered in a highly visual Ultracote colour
and trim scheme making orientation in the air very easy. The Tango
comes complete with all the mounting hardware to fly the plane on an
electric outrunner motor, should you wish to go for silent aerobatic
performance. The bolt on tail and one-piece wing makes for easy transportation
and assembly at the flying field whilst the comprehensive hardware
pack and fully illustrated assemble guide make building the model a
very simple and enjoyable process. |
Key Features
- Bolt on tail plane parts
- Bolt on one-piece wing
- Aluminium landing gear
- Electric conversion included
- Convenient storage and transportation
- Trainer to 3D fun fly performance
- Counter balanced rudder and elevator
- Bevelled control surfaces
|
Tech. Spec |
Wingspan |
123cm (48.5
inch) |
Length |
125cm (49.5 inch) |
Weight |
2.5-2.7kg (5.5-6lb) |
Engine |
.40-.52 2-stroke .56-.82
4-stroke |
Motor |
Power 46 BL Outrunner |
Radio |
4/6 channels |
Speed
control |
60Amp |
Battery |
4s 3200mah Li-Po |
|
Recommended
Engine Set-up |
Motor |
.40 2-stroke
(EVOE0400)
.46 2-stroke (EVOE0460
.52 2-stroke (EVOE0520) |
Radio |
DX7 with 5 servos |
Spinner |
2 ΒΌ |
|
Recommended
Set up Electric |
Motor |
Power 46 Outrunner
(EFLM4046A) |
Speed
Controller |
60Amp Brushless (EFLA1060) |
Battery |
4-cell 4s 3200mah Li-Po
(EFLB32004S) |
Radio |
DX7 with 4 servos |
|