E-Flite: EFL4265 Super Cub 25e

TECH SPEC

Wingspan:	1730mm (68.0 ins)
Length:	1160mm (45.5ins)
Wing Area:	43.3 sq dm (670 sq ins)
Weight:	2.30 - 2.55kg (5.0 - 5.6lbs)
Weight with battery :
2.65 – 2.9kg (5.85 – 6.4lbs)

FEATURES

Accurate scale outline
Functional shock-absorbing main gear
Magnetic, factory-painted fibreglass cowl with panel lines
Realistic corrugation detail on flap and aileron control surfaces
Functional scale cockpit door
Scale aluminium wing struts
Top quality balsa and light plywood construction
Covered in genuine Hangar 9 UltraCote® covering
Scale Super Cub wheels and tires
Traditional Super Cub trim scheme
Scale leaf spring tail wheel assembly
Two-piece plug-in wings
Realistic cockpit interior details (available separately)

BUILD UP

Recommended sport setup:
Motor: E-flite Power 25 BL Outrunner motor, 870Kv (EFLM4025A)
ESC: E-flite 60-Amp Pro Switch-Mode BEC brushless ESC (EFLA1060)
Battery: E-flite 4S 3200mAh 14.8V 30C LiPo battery (EFLB32004S30)
Propeller: APC 13 x 6.5E propeller (HFL7630)

Recommended high-power setup:
Motor: E-flite Power 32 BL Outrunner motor, 770Kv (EFLM4032A)
ESC: E-flite 60-Amp Pro Switch-Mode BEC brushless ESC (EFLA1060)
Battery: E-flite 4S 3200mAh 14.8V 30C LiPo Battery (EFLB32004S30)
Propeller: APC 14 x 7E Propeller (APC14070E)

Recommended Build-up:
Radio: Spektrum™ DX8 8-Channel DSMX™ transmitter (SPM8800)
Receiver: Spektrum AR7010 7-Channel DSMX receiver (SPMAR7010)
Servos: Spektrum A5030 digital mini servos (SPMSA5030)
Extra Detail: More detailed instruments, side and floor panels, flight controls. Cockpit (EFL462518)

MEDIA

Image Gallery Action Gallery

SPARES

EFL460001	Wing Set
EFL460002	Fuselage
EFL460003	Tail Set
EFL460004	Rudder
EFL460005	Cowling
EFL460006	Windshield
EFL460007	Top Window
EFL460008	Window Set
EFL460009	Wing Tube
EFL460010	Wheel Set
EFL460011	Tail Wheel
EFL460012	Pushrod Set
EFL460013	Seat Set
EFL460014	Strut Set
EFL460015	Accessory Set
EFL460016	Landing Gear
EFL460017	Hardware Set
EFL460018	Cockpit Set
EFL460019	Fuselage Hatch

EFL4265 Super Cub 25e

The Platinum Series Super Cub 25e ARF is as close of a replica as you can get of the full scale
Piper PA-18 Super Cub and includes features not commonly seen in a model of this size.

The Super Cub 25e ARF features a detailed all-scale outline for the most authentic looks, including a
fibreglass cowling with panel lines, flaps and ailerons with corrugated control surfaces, aluminium
wing struts, cockpit seats and a dash panel.

Additionally, for exceptional ground handling, the Super Cub 25e comes with scale operational landing
gear, tail wheel assembly and Super Cub wheels to add even more realism.

The Super Cub allows for easy set-up and breakdown with its removable two-piece plug-in wings,
as well as an operational door and magnetic hatch for easy access to the cockpit and battery.

The traditional Super Cub trim scheme on balsa and lightwood construction only add to the smooth,
gentle flying performance of this Platinum Series plane.

The Piper Super Cub

Piper Aircraft introduced the Piper PA-18 Super Cub in November 1949 in three basic versions: the
Standard, the Deluxe with starter and generator, and the Agricultural version.

It is a two-seat, single engine monoplane that was developed from the Piper PA-11 and can be traced
back through the J-3 to the Taylor E-2 Cub of the 1930's. However, the PA-18 Super Cub is differentiated
by the installation of an electrical system, flaps, and a more powerful engine.

In 40 years of production roughly 9,000 Super Cubs were built and were commonly used for bush
flying, banner and glider towing.

Back to start of Section Top of Page