 |
 |
EFLH1500 E-flite Blade SR
After mastering the basics of coaxial flight with a Blade mCX
or CX3, you can now make a smooth transition to a CCPM (Cyclic/Collective
Pitch Mixing) helicopter with the superb ready-to-fly single-rotor
Blade SR.
Every aspect of the Blade SR has been set-up to help the novice single-rotor
pilot achieve flying success without the usual drama normally associated with
larger single rotor helicopters.
The Blade SR comes out of the box fully assembled and pre-programmed
to provide a softer climb, pitch and roll response around the
center of stick movement making it a perfect choice for pilots
looking to advance their helicopter flying to the next level,
outdoors!
This robust, micro-class, collective pitch (CP) helicopter combines
the CP Pro 2’s proven Bell-Hiller rotor head and direct-drive
tail rotor making it an ideal transition between the more basic
coaxial helicopters and outright 3D helicopters like the Blade
400.
The Blade SR is large enough to fly outdoors even in slightly
windy conditions and with its pre-installed E-flite G110 Heading
Lock Gyro reducing the pilot workload with its excellent heading
hold capabilities, the transition from coaxial to single-rotor
control systems is much smoother and easier to handle.
Perfectly set-up for single-rotor basics the Blade SR with it’s
two-piece plastic-moulded frame can easily endure the bumps and
bruises that go along with learning to fly larger micro-class,
outdoor-capable helicopters.
More forgiving and easier to master than most conventional CP
(collective pitch) helicopters thanks to it’s lower head speed
and “tamer” set-up, the ready-to-fly Blade SR is the perfect
choice for anyone moving up to outdoor helicopter flying. |
IN THE BOX |
|
 |
Spektrum™ 2.4GHz DSM2™ technology.
HP6DSM 2.4Ghz 6-channel transmitter. |
 |
E-flite 3S 11.1V LiPo, 0.8 amp
balancing
charger 11.5 to 15v DC input. 240V mains to
12v DC adaptor. |
 |
Transmitter batteries. |
 |
3S 11.1V 1000 mAh LiPo |
EFLH1521
optional red canopy
EFLH1504 black rail boom |
|
 |
|
- More forgiving and easier to master
than
most conventional CP helis thanks to a tough
2-piece main frame
and lower head speed
- Out of the box programmed to provide
softer climb, pitch and roll
response around
the center of stick movement.
- A great 2nd heli for anyone who has flown
a Blade CX3 or mCX
- 100% factory-assembled, test-flown and
ready-to-fly
- CCPM programming softens control
response around center
- Includes 6-channel HP6DSM 2.4GHz
DSM2 transmitter, DC Li-Po balancing
charger and 3S 11.1V 1000mAh Li-Po
battery pack
- Spektrum AR6100e Microlite Receiver and
E-flite G110 Heading Lock
Gyro installed
- Direct-drive tail motor
- Sturdy, shock absorbent two-piece main
frame
- Full line of replacement and option
parts available
|
|
 |
|
| Length: |
485mm (19 in) |
| Height: |
176mm (6.9 in) |
| Main Rotor Diameter: |
550mm 21.8 in (550mm) |
| Weight with Battery: |
340g (12 oz) |
| Main Motor: |
Brushless Coreless |
| Tail Motor: |
Brushed |
| Battery: |
3S 11.1V 1000mAh Li-Po |
| Charger: |
3S 11.1V LiPo, 0.8A Balancing Charger |
| Transmitter: |
HP6DSM 2.4GHz DSM2 6-channel |
| On-Board Electronics: |
DS75H Servos (3), 2-in-1 ESC/Mixer,
G110 Heading Lock Gyro, Spektrum™ AR6100e 6-Channel Receiver |
|
|
 |
|
Download
the Blade SR manual. 3.6 MB.
Download an exploded diagram of the CX2 plus a parts listing.
View an exploded diagram of the CX2 plus a parts listing.
|
|
 |
|
 |
|
 |
|
|
|
 |
|
|
|
