| An ideal replacement for 30-32 glow
engine size sport and scale airplanes weighing 3.5-6lb (1.6-2.7kg)
25 size 3D airplanes up to 4lb (1.8 kg) or models requiring up
to 650 watts of power. Quiet, powerful and equivalent to a Speed
600 motor. The Power 32 outrunner is constructed from top quality
materials, with a hardened steel shaft supported by twin ball bearings.
The only wearing parts in the system are these bearings, and these
have been rated for hundreds of hours
of usage. Silicone covered wire with gold connectors ensure that there
is maximum current flow to optimise performance. There is no need to
use a gearbox with the Power 32 as the performance of this motor allows
quite large propellers to be turned with ease, 12x7 to 14x10 being
the norm. |
 |
| included hardware |
 |
|
| |
| Diameter: |
1.7 inch (42mm) |
| Case length: |
1.9 inch (50mm) |
| Weight: |
7 oz (200g) |
| KV: |
770Kv |
| Shaft diameter: |
.2 inch (5mm) |
| Continuous current: |
42Amp |
| Maximum burst current: |
60Amp |
| Controller: |
60amp brushless required |
| Prop: |
11 x 7 to 14 x 10 |
| Cells: |
10 – 14 Ni-Mh/Ni-cd or 3-4 Li-Po |
|
| EFLM40321 Power 32 Motor Shaft |
EFLM40462 – X-Mount/Hardware |
 |
 |
|
|
