 |
| A range
of optional or replacement pinions for use with the
E-flite Park 370 – 400 electric motors, machined
from brass for long life and durability. |
| EFLM1900 |
Pinion gear 10T 0.4 Park
370/400 |
| EFLM1901 |
Pinion gear 12T 0.4 Park 370/400 |
| EFLM1902 |
Pinion gear 14T 0.4 Park 370/400 |
| EFLM1903 |
Pinion gear 16T 0.4 Park 370/400 |
| EFLM1904 |
Pinion gear 18T 0.4 Park 370/400 |
| EFLM1905 |
Pinion gear 20T 0.4 Park 370/400 |
| EFLM1949 |
Pinion gear 8T 0.5 Park 370/400 |
| EFLM1950 |
Pinion gear 9T 0.5 Module 2mm Inner Diameter |
| EFLM1951 |
Pinion gear 10T 0.5 Park 370/400 |
| EFLM1952 |
Pinion gear 9T 0.5 Module 2.3mm Inner Diameter |
| EFLM1953 |
Pinion gear 10T 0.5 Module 2.3mm Inner Diameter |
| EFLM1954 |
Pinion gear 18T 0.5 Module 2.3mm Inner Diameter |
| EFLM1955 |
Pinion gear 19T 0.5 Module 2.3mm internal diameter |
| EFLM1956 |
Pinion gear 18T 0.5 Module 3.2mm Inner Diameter |
| EFLM1957 |
Pinion gear 19T 0.5 Module 3.2mm Inner Diameter |
| EFLM202 |
Pinion gear 12T 0.4 |
| EFLM207 |
Pinion gear 10T 0.4 |
|
|
|
|
| This state
of the art Power Metre is designed to use inline. It
displays Volts (V) Amps (A) Watts (W) and capacity
(Mah) based on your MODE selection. Connectors are
not included, allowing you to customise the meter to
fit your needs. When soldering connectors onto the
lead wires, be sure to use heat shrink tubing to properly
insulate the wires so they |
|
will not
short out, and cause damage to the metre. Designed
for ease of use, the Power Metre is equipped with a
Lo-Volt icon indicator, which will display when the
input voltage is below 3Volts and to low for the metre
to operate, and any values obtained at this time will
be inaccurate. |
|
| Tech
Spec |
|
| Current
Display |
Range 100Mah – 120Amp |
| Voltage
Display |
Range 4Volt – 50Volt |
| Power
Display |
Up to 6000Watts |
| Current
Resolution |
1Amp |
| Voltage
Resolution |
1Volt |
| Power
Resolution |
1Watt |
| Capacity |
Up to9999Mah |
|
 |
|
|
 |
|
This handy 24mm adaptor ring allows smaller diameter brushless
motors to be fitted to E-flite or GWS gearboxes. |
|
|
 |
|
Just about everything that moves generates heat in one form
or another, and electric motors are no different. E-flite
have an answer to reducing the effects of heat in the
Park 370 and 400 motors with this add on heat sink, anodised
aluminium and deeply finned this heat sink will help
dissipate the heat generated, improving motor performance
and aiding motor life, comes with a special adhesive
for mounting.
Available in two sizes,
ELFM1911 is12x20mm and
ELFM1912 is 20x20mm. |
|
|
 |
|
Just about everything that moves generates heat in one form
or another, and electric motors are no different. E-flite
have an answer to reducing the effects of heat in the
Park 370 and 400 motors with this add on heat sink, anodised
aluminium and deeply finned this heat sink will help
dissipate the heat generated, improving motor performance
and aiding motor life, comes with a special adhesive
for mounting.
Available in two sizes,
ELFM1911 is12x20mm and
ELFM1912 is 20x20mm. |
|
|
 |
|
A special heat resistant
compound used to permanently fix a heat sink
to the outer case of electric motors, helping
to reducing heat build up. |
|
|
 |
|
This mount comes complete with all the mounting hardware
needed, and in use it maintains the same thrust line when
replacing stick-mounted gearboxes with outrunner motors.
The slotted mounting holes accept 16-19mm bolt spacing, and
the mount is perfect for mounting Park 370-480 outrunner
motors. |
|
|
 |
|
The perfect accessory for electric flyers, this handy little
tool will remove motor pinions without causing damage to
the motor shaft or pinion, allowing pinions to be changed
easily, enabling the user to optimise motor performance. |
|
|
 |
