 |
| |
| Size Category: |
Minis and Micros |
| Type: |
Analogue |
| Torque: |
20oz/in at 4.8V, 22oz/in at 6.0V |
| Speed: |
24 sec/60° at 4.8V, .20 sec/60° |
| Bushing Or Bearing: |
Bushing |
| Gear Type: |
Nylon |
 |
|
 |
|
|
|
|
| |
| The S60 is a power horse for
its size. Weighing just 6g, including servo arm and connector,
it produces an impressive 12.5 oz/in of torque with a good
transit time of .10 sec/60 deg on just 4.8V. The combination
of lightweight and power not only makes it great choice for
small indoor slow flyers, but park flyers as well. Complete
mounting and an assortment of servo arms, like an extra long
3D arm, are also included |
 |
| Operating voltage |
4.8-5.3Volt DC |
| Operating Speed |
10sec/60%@4.8Volt |
| Output Torque |
12.5oz/in (0.9kg.cm) |
| Motor type |
Coreless |
| Connector type |
Universal |
| Actual weight |
.21oz (6.0gm) |
| Dimensions |
(LxWxH) .93x.39x.74inch (23x10x19mm) |
|
|
| |
|
 |
 |
 |
 |
Replacement gear set for the S60 Super Sub-Micro servo, made
from a tough impact resistant nylon. |
A complete replacement servo case, made from tough semi transparent
nylon, complete with assembly screws. |
Replacement nylon servo arms with mounting screw, including
an extra long arm for increased throw, ideal for 3D flyers
S60/S75 |
Extended, extra long nylon servo arm designed to give maximum
throw for to-days extreme 3D and aerobatic flying S60/S75. |
|
|
 |
| Tech Spec |
|
| Size Category: |
Minis and Micros |
| Type: |
Digital |
| Application: |
Sub-micro and Micro-sized airplanes and helis |
| Torque: |
13.1 oz-in (0.94kg-cm) @4.8V; 16.1 oz-in (1.15kg-cm) @ 6.0V |
| Speed: |
0.09 sec/60° @ 4.8V; 0.08 sec/60° @ 6.0V |
| Length: |
23.5mm (0.92 in ) |
| Width: |
10.0mm (0.40 in) |
| Height: |
24.0mm (0.96 in) |
| Weight: |
6.0g (0.21 oz) |
| Motor Type: |
Coreless |
| Connector Type: |
Universal |
| Gear Type: |
Nylon |
| Current Draw Idle: |
25mA @ 4.8V |
| Current Draw Stall: |
560mA @ 4.8V |
| Voltage: |
4.8V-6.0V DC |
| Deadband: |
<1μs |
|
|
|
| |
The S75 servo from E-flite
an economical and versatile sub-micro servo That's perfect
for electric slow flyers, park flyers and high performance
3Dmodels.
Thanks to the favourable torque-weight ratio, the servo may
also be used in micro and mini electric helicopters and 1/18th
on and off-road vehicles.
The S75 high-speed, high-torque servo comes complete
with mounting hardware and a selection of servo arms
including an extra long 3D arm for extreme control throws,
and it may be used in all our E-flite products |
 |
| Operating voltage |
4.8-5.3Volt DC |
| Operating Speed |
12 sec/60%@4.8Volt |
| Output Torque |
17.2oz/in (1.17kg.cm) |
| Motor type |
Coreless |
| Connector type |
Universal |
| Actual weight |
26oz (7.5gm) |
| Dimensions |
(LxWxH) .90x45x94inch (23x12x24mm) |
|
|
| |
|
 |
 |
|
|
Replacement gear set for the S75 Sub-Micro servo, made from
a tough impact resistant nylon. |
A complete replacement servo case, made from tough semi transparent
nylon, complete with assembly screws. |
Replacement nylon servo arms with mounting screw, including
an extra long arm for increased throw, ideal for 3D flyers
S60/S75 |
Extended, extra long nylon servo arm designed to give maximum
throw for to-days extreme 3D and aerobatic flying S60/S75. |
|
|
 |
| |
| Size Category: |
Minis and Micros |
| Type: |
Digital |
| Torque: |
17.2 oz/in (1.17 kg. cm) at 4.8V |
| Speed: |
.11 sec/60 deg at 4.8V |
| Dimensions (WxLxH): |
.45 x .90 x .94 in (12 x 23 x 24mm) |
| Weight: |
.26 oz (7.5 g) |
| Bushing Or Bearing: |
Bushing |
| Motor Type: |
Coreless |
| Connector Type: |
Universal |
| Gear Type: |
Nylon |
| Application: |
Micro and mini electric helicopters |
|
| |
|
 |
 |
 |
 |
EFLRSA100
Standard Arm Set,
Fine Spline |
EFLRSA101 3D
Arm Set, Fine
Spline (4) |
EFLRDS751 – Gear
Set |
EFLRS752 – Case
Set |
|
|
 |
| |
| Size Category: |
Minis and Micros |
| Type: |
Digital |
| Dimensions (WxLxH): |
12 x 23 x 24mm (.45 x .90 x .94 in) |
| Weight: |
.26 oz (7.5 g) |
| Motor Type: |
Coreless |
| Connector Type: |
Universal |
| Gear Type: |
Nylon |
| Application: |
Electric slow flyer to park flyer 3D airplanes,
micro to mini electric helicopters and 1/18th scale on-road
and off-road vehicles |
|
| |
|
|
|
EFLRSA101
3D Arm Set, Fine
Spline (4) |
EFLRDS751 – Gear
Set |
EFLRS752 – Case
Set |
|
|
|
|
 |
| Size Category: |
Minis and Micros |
| Type: |
Digital |
| Application: |
Sub-micro and Micro-sized airplanes and helis |
| Torque: |
24.2 oz-in (1.75kg-cm) @ 4.8V; 28.0 oz-in (2.00kg-cm) @ 6.0V |
| Speed: |
0.11 sec/60° @ 4.8V; 0.09 sec/60° @ 6.0V |
| Length: |
0.90 in (23.0mm) |
| Width: |
0.45 in (11.5mm) |
| Height: |
0.96 in (24.0mm) |
| Weight: |
0.27 oz (7.6g) |
| Motor Type: |
Coreless |
| Connector Type: |
Universal |
| Gear Type: |
Nylon |
| Current Draw Idle: |
27mA @ 4.8V |
| Current Draw Stall: |
473mA @ 4.8V |
| Voltage: |
4.8V-6.0V DC |
| Deadband: |
<1μs |
|
|
|
 |
| |
| Type: |
Micro heading lock gyro |
| Sensor Type: |
MEMS |
| Weight: |
0.74 oz (21.0 g) |
| Length: |
0.96 in (24.5mm) |
| Width: |
1.00 in (25.5mm) |
| Height: |
0.46 in (11.5mm) |
| Operating Voltage: |
4.8V-6.0V |
| Reversing Switch: |
Yes |
| High/Low Frame Rate Select: |
Yes |
| Servo Travel Limiter: |
Yes |
|
|
 |
| |
| Type: |
Sub-Micro |
| Sensor Type: |
Piezoelectric Ceramic |
| Weight: |
.32 oz (9.0 g) |
| Dimensions (WxLxH): |
20 x 20 x 15mm (0.8 x 0.8 x 0.6 in) |
| Gain Type: |
Single on-gyro or dual remote |
| Operating Voltage: |
4.2–8.0V |
| Reversing Switch: |
Yes |
High/Low
Frame Rate Select: |
Yes - Standard/Analog servo and Digital
Servo Support |
| |
|
| |
|
| |
|
|
|
 |
| This handy little device simply connects
two servos and the receiver of non-computerised radios and
allows for mixing controls on delta wing type models, for
elevons, etc. |
|
 |
