Power is nothing without control and E-flite have gone about harnessing the power of their lines of brushed and brushless motors with equivalent ranges of electronic speed controllers (ESC's). They can all handle power from NI-MH or Li-PO cells but are all designed to be as small and light as possible. BEC circuitry is present throughout the range so power for the radio equipment is taken from the main power source and this, along with many other features such as programmable cut-off and overload protection make them some of the best value ESC's available today.
   
   
   
 
   
 
 
   
   
 
   
     
BRUSHED SPEED CONTROLLERS
EFLA100 16 Amp Electronic Speed Control
 
A lightweight pre-wired speed control with Tamiya style plug and on-off switch. Ready to use straight from the packet this economical speed control will work with six to ten cell packs and handles up to sixteen amps, and built-in overload protection.  
 
EFLA102 Maxx 25 Speed Control
  A compact speed controller, pre-wired and ready to use. The Maxx 25 has BEC circuitry, which eliminates the need for a separate receiver pack, and it comes complete with an on/off switch, Tamiya style plug, bullet connectors and an arming switch. Designed to handle twenty-five amps continuous current, with built in overload protection.
EFLA103 5-Amp Micro ESC  
Tech Spec  
Operation Proportional forward power, auto cut-off (no brake)
Input Voltage 5 cell (6Volts) through 10 cell (12 Volts)
Continuous Current  5 Amps
Size (20.3mm x11.6mm x6.3mm)
Weight  .20ounces (5.6gm)
A lightweight sub-micro electronic speed controller with auto cut-off technology. Featuring B.E.C circuitry with overload protection. This product guarantees the highest quality, performance and reliability at a “value-packed” price.
  
 

Features

  • Auto cut-off shuts off power to the motor while still supplying power to operate the radio
  • Thermal overload projection
  • 5 Amp continuous current
  • Input voltage 5-cell (6Volts) through 10-cell (12Volts)
  • BEC voltage range 3.3Volts DC, 1 Amp
  • Pre-wired with JST battery connector and two-pin (JWT) motor connector
  • Universal receiver plug
 EFLA104 10 Amp Micro ESC  
Tech Spec  
Operation Proportional forward power, auto cut-off (no brake)
Input Voltage 5 cell (6Volts) through 10 cell (12 Volts)
Continuous Current  5 Amps
Size (21.3mm x12.7mm x7.1mm)
Weight  .24ounces (6.8gm)
A lightweight sub-micro electronic speed controller with auto cut-off technology. Featuring B.E.C circuitry with overload protection. This product guarantees the highest quality, performance and reliability at a “value-packed” price.
  
 

Features

  • Auto cut-off shuts off power to the motor while still supplying power to operate the radio.
  • Thermal overload projection
  • 10 Amp continuous current
  • Input voltage 5-cell (6Volts) through 10-cell (12Volts)
  • BEC voltage range 4.8Volts DC, 1 Amp
  • Pre-wired with JST battery connector and two-pin (JWT) motor connector
  • Universal receiver plug
EFLA105 20 Amp Mini ESC with Brake  
Tech Spec  
Operation Proportional forward power, with brake auto cut-off
Input Voltage 5 cell (6Volts) through 10 cell (12 Volts)
Continuous Current  20Amps
Size (29mm x17mm x6.6mm)
Weight  .63ounces (17.8gm)
A lightweight mini electronic speed controller with auto cut-off technology and brake. Featuring B.E.C circuitry with overload protection and on/off switch. This product guarantees the highest quality, performance and reliability at a “value-packed” price.
 
 

Features

  • Auto cut-off shuts off power to the motor while still supplying power to operate the radio.
  • Thermal overload projection
  • 20 Amp continuous current
  • Input voltage 5-cell (6volts) through 10-cell (12Volts)
  • BEC voltage range 3.3Volts DC, 1 Amp
  • Pre-wired with Tamiya battery connector and bullet-style motor connectors
  • Universal receiver plug with on/off switch
EFLA106 30 Amp Mini ESC with Brake  
Tech Spec  
Operation Proportional forward power, with brake auto cut-off
Input Voltage 5 cell (6Volts) through 10 cell (12 Volts)
Continuous Current  30Amps
Size (34.8mm x16mm x 8.6mm)
Weight  .86ounces (24.3gm)
A lightweight mini electronic speed controller with auto cut-off technology and brake. Featuring B.E.C circuitry with overload protection and on/off switch. This product guarantees the highest quality, performance and reliability at a “value-packed” price.
  
 

Features

  • Auto cut-off shuts off power to the motor while still supplying power to operate the radio.
  • Thermal overload projection
  • 30 Amp continuous current
  • Input voltage 5-cell (6Volts) through 10-cell (12Volts)
  • BEC voltage range 3.3Volts DC, 1 Amp
  • Pre-wired with Tamiya battery connector and bullet-style motor connectors
  • Universal receiver plug with on/off switch