Speed Controller
SEE ALL PRODUCT GROUPS

ESCS FOR BRUSHLESS MOTORS
BRUSHLESS SPEED CONTROLLERS
EFLA1080 80-Amp Pro Switch-Mode BEC Brushless ESC, EC5
Tech Spec  
Forward: Yes
Brake: Yes
Time Delay Brake: Yes
Continuous Maximum Current: 80A
Input Connector Types: EC5, 10AWG
Output Connector Types: 4mm Gold Bullet, 12AWG
Momentary Peak Current: 100A
Length: 77mm (3.0 in)
Width: 41mm (1.6 in)
Height: 15.5mm (0.62 in)
Weight: 106g (3.75 oz)
BEC Voltage: 5.5V Switch-mode
Overload Protection: Yes
  • Programmable motor braking
  • Programmable voltage cut-offs for 2-3 Cell Li-Po or 6-12 Cell
  • Ni-Cd/Ni-MH packs
  • Duel BEC regulators for use with up to four servos when using 3-Cell Li-Po and 10-Cell
  • Ni-Cd/Ni-Mh packs
  • Automatically sets correct motor timing
  • Safe power-on mode prevents accidental starts
  • Includes gold bullet connectors and extension wire leads for your motor.
EFLA311 20-Amp Brushless
Features
  • Programmable motor braking
  • Programmable voltage cut-offs for 2-3 Cell Li-Po or 6-12 Cell
  • Ni-Cd/Ni-MH packs
  • Duel BEC regulators for use with up to four servos when using 3-Cell Li-Po and 10-Cell
  • Ni-Cd/Ni-Mh packs
  • Automatically sets correct motor timing
  • Safe power-on mode prevents accidental starts
  • Includes gold bullet connectors and extension wire leads for your motor.
Tech Spec
Length: 36mm (1.4inch)
Width: 24mm(.95inch)
Height : 9mm (.37inch)
Weight: 14gm (.5ounces)
Continuous Amps: 20
Cells: 6-12 Cell Ni-Cd/Ni-MH packs or 2-3 Cell Li-Po
Features
  • Programmable motor braking
  • Programmable voltage cut-offs for 2- to 3-cell
  • Li-Po or 6- to 12-cell Ni-Cd/Ni-MH packs
  • Up to 20-amp continuous current with proper air flow
  • Dual BEC regulators for use with up to 4** servos when using 3-cell Li-Po and 10-cell
  • Ni-Cd/Ni-MH packs
  • Automatically sets correct motor timing
  • Safe power-on mode prevents accidental starts
  • Includes gold bullet connectors and extension wire leads for motor
 EFLA311B 20-Amp Brushless
EFLA311B 20-Amp Brushless
Tech Spec
Length: 24mm (.95in)
Width: 36mm (1.4 in)
Height: 9mm (.37 in)
Brake: Yes, programmable
Continuous Maximum
Current: 		20A
Input Voltage: 7.2–14.4V Ni-Cd/Ni-MH; 7.4– 11.1V Li-Po
BEC Voltage: Dual BEC circuits
Auto Cutoff: Programmable
EFLA325A 25-Amp Airplane EFLA325H 25-Amp Helicopter  
Tech Spec
Length: 38mm (1.4 in)
Width: 23mm (0.9 in)
Height: 8mm (0.3 in)
EFLA325H 25-Amp Helicopter EFLA325H 25-Amp Helicopter  
Tech Spec
Length: 24mm (.95in)
Width: 36mm (1.4 in)
Height: 9mm (.37 in)
Brake: Yes, programmable
Continuous Maximum
Current: 		20A
Input Voltage: 7.2–14.4V Ni-Cd/Ni-MH; 7.4– 11.1V Li-Po
BEC Voltage: Dual BEC circuits
Auto Cutoff: Programmable
Features
  • Programmable motor braking
  • Programmable voltage cut-offs for 2-3 Cell Li-Po or 6-12 Cell
  • Ni-Cd/Ni-MH packs
  • Duel BEC regulators for use with up to four servos when using 3-Cell Li-Po and 10-Cell
  • Ni-Cd/Ni-Mh packs
  • Automatically sets correct motor timing
  • Safe power-on mode prevents accidental starts
  • Includes gold bullet connectors and extension wire leads for your motor.
EFLA312 40-Amp Brushless
Tech Spec
Length: 50mm (2inch)
Width: 26mm (1inch)
Height: 10mm (.4inch)
Weight: 20gm (7ounces)
Continuous Amps: 40
Cells: 6-12 Cell Ni-Cd/Ni-MH packs or 2-3 Cell Li-Po
EFLA312B 40-Amp Brushless ESC (V2)
 EFLA312b
Features
  • Up to 40A continuous current with proper air flow
  • Dual BEC regulators for use with up to 4 servos when using 3-cell LiPo and 10-cell Ni-Cd/Ni-MH battery packs
  • Programmable voltage cutoffs for 2–3 cell LiPo or 6–12 cell Ni-Cd/Ni-MH battery packs
  • Programmable motor braking
  • Automatically sets correct motor timing
  • Safe power-on mode prevents accidental starts
  • Includes gold bullet connectors and extension wire leads for your motor
Tech Spec
Brake: Yes, programmable
Continuous Maximum
Current:		 40A
Input Voltage: 7.2–14.4V Ni-Cd/Ni-MH or 7.4–11.1V LiPo battery
Dimensions (WxLxH): 50 x 26 x 10mm (2 x 1 x 0.4 in)
Weight: 20 g (0.7 oz)
BEC Voltage: Dual BEC circuits
Auto Cutoff: Yes, programmable
EFLA335H – 35-Amp Helicopter Brushless ESC: B450 35 Amp ESC  
EFLA1005 5-Amp Pro Brushless
Features
  • Up to 5 amps continuous current with proper air flow
  • Drives up to 4 sub-micro servos on 2S
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low voltage cutoff with settings for 2-cell Li-Po or 74% of battery starting voltage
  • Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  • Soft start
  • Auto motor shut down if signal is lost or there is interference
  • Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
  • Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads
Tech Spec
Length: 25mm (1inch)
Width: 17mm (.67inch)
Height : 7mm (.27inch)
Weight: 8gm (.28ounces)
Continuous Amps: 5A
Cells: 2–3S Li-Po or 6–7 cell Ni-MH/Ni-Cd
Features
  • Auto select throttle input range
  • Soft start with programmable brake
  • Auto shut down if signal lost
  • 2mm gold bullet connectors
  • Pre-wired JST battery plug lead
  • Safe arm mode prevents accidental starts
EFLA1010 10Amp Brushless ESC
Tech Spec
Continuous Current 10Amp
Max Burst Current 12Amp (15seconds)
Length 30mm (1.2inch)
Width 17.5mm (.7inch)
Height 10mm (.4inch)
Weight 10g (.35ounce)
Cells 2-3s Li-Po or 6-10 Ni-Mh/Ni-Cd

EFLA1025 25-Amp Pro Brushless ESC
Features
  • Soft start with programmable brake
  • Auto select throttle input range
  • Auto shut down if signal lost
  • Gold bullet connectors
  • Pre-wired JST battery plug lead
  • Safe arm mode prevents accidental starts
  • Battery input leads 16Gauge with E-flite EC3 connectors
  • Motor output leads 16Gauge with 3.5 female gold connectors
Tech Spec
Continuous Current 25Amp
Max Burst Current 30Amp (15 Seconds)
Length 48mm (1.9 inch)
Width 28mm (1.1 inch)
Height 11mm (.4 inch)
Weight 32g (1.2 oz)
Cells 2-3 Li-Po or 6-10 cell Ni-Mh/NiCd
Features
  • Up to 30Amp continuous current with a
  • 35Amp burst current (15 seconds)
    5Volt switch-able BEC
  • Use up to 5 analogue or 4 digital sub micro size servos
  • Input voltage 3-4 Li-Po or 9-12 cell Ni-Mh/NiCd
  • Programmable motor braking
  • Safe power arm mode prevents accidental starts
  • Programmable low voltage cut off for Li-Po’s from 3-cell up to 4-cell.
  • Programmable soft start for helicopters and airplanes
  • Auto motor shut down if signal is lost or there is interference
  • Programmable motor timing
  • Heli mode for starting the motor with a low speed ratio
  • Optional serial link programming lead (EFLARS232)
EFLA1030 30-Amp Pro Switch-Mode BEC Brushless ESC
Tech Spec
Continuous Current 30Amp
Max Burst Current 35Amp
Length 51mm (2 inch)
Width 28mm (1.1 inch)
Height 8.7mm (.35 inch)
Weight 31g (1.1oz)
Cells 3-4 Li-Po or 9-12 cell Ni-Mh/NiCd

EFLA1040 40-Amp Pro Switch-Mode BEC Brushless ESC
Features
  • Up to 40Amp continuous current with a 55Amp burst current (15 seconds)
  • 5Volt switch-able BEC
    Use up to 7 analogue or 6 digital standard size servos
  • Input voltage of 3-6S Li-Po 9 to 18 cell Ni-Mh
  • Finned heat sink
  • Programmable motor braking
  • Safe power arm mode prevents accidental starts
  • Programmable low voltage cut off for Li-Po’s from 3-cell up to 6-cell
  • Programmable soft start for helicopters and airplanes
  • Auto motor shut down if signal is lost or there is interference
  • Programmable motor timing
  • Programmable throttle input range
  • Pre-wired connectors EC3 on battery input
  • 3.5mm female gold motor connectors
Tech Spec
Continuous Current 40Amp
Max Burst Current 55Amp (15 Seconds)
Length 68mm (2.7 inch)
Width 33mm (1.3 inch)
Height 13mm (.5 inch)
Weight 62g (2.2oz)
Cells 3-6 Li-Po 9-18 cell Ni-Cd/Ni-Mh
Features
  • Up to 40Amp continuous current with a 55Amp burst current (15 seconds)
  • 5Volt switch-able BEC
  • Use up to 7 anolog or 6 digital standard size servos
  • Input voltage of 3-6S Li-Po 9 to 18 cell Ni-Mh/Ni-cd
  • Programmable motor braking
  • Safe power arm mode prevents accidental starts
  • Programmable soft start for helis and airplanes
  • Auto shut down if signal is lost
  • Programmable motor timing
  • Programmable throttle input range
  • Heli mode for starting the motor with a low speed ratio
  • Optional serial link programming lead (EFLARS232)
  • Pre-wired connectors EC3 on battery input
  • 3.5mm female gold motor connectors
EFLA1040L 40-Amp Lite Pro Switch-Mode BEC Brushless ESC
Tech Spec
Continuous Current 40Amp
Max Burst Current 55Amp (15 Seconds)
Length 66mm (2.6 inch)
Width 31mm (1.2 inch)
Height 12mm (0.47 inch)
Weight 48g (1.7oz)
Cells 3-6 Li-Po 9-18 cell Ni-Cd/Ni-Mh
EFLA1060 60-Amp Pro Switch-Mode BEC Brushless ESC
 60-Amp Pro Switch-Mode BEC Brushless ESC
Features
  • 5Volt switch-able BEC
  • Use up to 7 analogue or 6 digital standard size servos
  • Finned heat sink to dis-place heat generated
  • Programmable motor braking
  • Safe power arm mode prevents accidental starts
  • Programmable low voltage cut off for Li-Po’s from 3-cell up to 6-cells
  • Programmable soft start for helicopters and airplanes
  • Auto motor shutdown if signal is lost or there is interference
  • Programmable motor timing
  • Programmable throttle input range
  • Helicopter mode for starting the motor with a low speed ratio
  • Latest mosfets technology for weight saving
  • Radio power switch on/off
  • Pre-wired connectors EC3 on battery input
  • 3.5mm female gold motor connectors
Tech Spec
Continuous Current 60Amp
Max Burst Current 75Amp (15 Seconds)
Length 76mm (3 inch)
Width 33mm (1.3 inch)
Height 13mm (.5 inch)
Weight 66g (2.3oz)
Cells 3-6 Li-Po 9-18 cells Ni-Cd/Ni-Mh
EFLA7310 BL Controller, 22A
 EFLA7310 BL Controller, 22A
Features
  • Up to 22-Amp continuous current with proper air flow
  • Automatically sets correct motor timing
  • Includes pre-wired EC3 Devise and gold bullet connectors
Tech Spec
Length: 46.5mm (1.8 in)
Width: 25.5mm (1 in)
Height: 9mm (.35 in)
Weight: 32 g (1.1 oz)
Cells: 3S Li-Po
Continuous Amps: 22
 
Back to Start of Section Back to Start of Section