 |
 |
| |
|
| Wingspan: |
810mm
(32inch) |
| Length: |
760mm (30inch) |
| Weight: |
215-230
gr (7.5-80oz) |
| Motor: |
Park 300
1380kv |
| Battery |
3 cell 7300mAh
Li-Po (required) |
| Speed control |
10 Amp brushless
(required) |
| Servos |
4 S60 Super
Sub Micro |
| Radio |
6 channel |
|
 |
|
|
|
- Built up “ box section” fuselage
- 3mm Depron construction
- Pre-built carbon pushrods ready for installation
- Vibrant pre-painted colour scheme
- Matched to E-flite’s Park 300 outrunner motor
- Laser cut 3mm foam parts
|
|
|
|
| |
 |
| EFL1151 |
Pushrod
Set |
| EFL1152 |
Wheel Pants |
| EFL1153 |
Side Force Generator |
|
|
|
| |
 |
| Motor |
Park
300 Outrunner 1380Kv (EFLM1150)
|
| Speed Controller |
10Amp Brushless
(EFLA1010) |
| Battery |
3-Cell 11.1V
800mah Li-Po (EFLB0995) |
| Servo |
S60 Sub micro
servo x4 (EFLRS60) |
| Prop |
8X3.8 |
|
|
|
 |
The new electric powered Funtana 300 from E-flite
offers outstanding flight performance and features
a unique built up box section fuselage. Using 3mm
Depron with carbon fibre support struts spar reinforced
wings the resulting super-light model is very capable
at just about every aerobatic manoeuvre in the book
either 3D or precision aerobatics. For even wilder
performance you can fit the optional Side Force Generators
for outstanding knife-edge flight. Designed to fly
using E-flites Park 300 brushless outrunner the Funtana
300 is not only extremely comfortable flying indoors,
thanks to it’s unique durable design it can
also be flown outdoors in light winds up to 10 mph
unlike other electric profile foam models. As little
as 3 to 4 hours of simple assembly is all it takes
and the Funtana can be made ready to fly thanks to
the pre-painted laser-cut Depron parts with carbon
support rods, pre-built carbon push rods and a complete
hardware pack with illustrated assembly guide |
|
 |
|
|
