 |
 |
| |
|
| Wingspan: |
37inch (940mm) |
| Length: |
36inch (91.5mm) |
| Weight: |
22-25 ounces (625-710gm) with battery |
| Motor: |
Park 400 Brushless, 3700Kv or 4200Kv |
| Radio |
4 channel |
| Speed control: |
25 Amp Brushless |
| Prop size: |
12 x 6 (included) |
| Hardware
Included: |
Yes |
| Recommended
Battery: |
11.1V 1800mAh - 2100mAh LiPo |
| Approx. Assembly
Time: |
4-6 hours |
| Servos: |
4 sub-micro |
| CG (center
of gravity): |
3-1/8" (80mm)
behind leading edge |
| Control Throw
(Ailerons): |
Low Rate - 1" (25mm)
up/down or High Rate - 1-7/8" (48mm) up/down |
| Control Throw
(Elevator): |
Low Rate - 3/4" (19mm)
up/down or High Rate - 2-5/16" (58mm) up/down |
| Control Throw
(Rudder): |
Low Rate - 1-3/4" (95mm)
up/down or High Rate - 2-3/4" (95mm) up/down |
|
 |
|
| |
 |
- Traditional wood construction
- Carbon-fibre landing gear
- High quality hardware pack
- Ulatracote covering
- Fibreglass cowl and wheel spats
- 6.6:1 gearbox with 10T pinion gearand 12x6 prop included
(no motor)
- Can be upgraded using E-flite
- brushless motors
- Approx. Flying Duration: 10-15minutes
|
|
 |
|
| |
 |
EFL2076
|
Mini Funtana
Main wing set |
| EFL2077 |
Mini Funtana Fuselage w/hatch |
| EFL2078 |
Mini Funtana Tail set |
| EFL2079 |
Mini Funtana Pushrod set |
| EFL2080 |
Mini Funtana Main landing gear carbon |
| EFL2081 |
Mini Funtana Fuselage hatch |
| EFL2082 |
Mini Funtana Canopy |
| EFL2083 |
Mini Funtana Painted cowl |
| EFL2084 |
Mini Funtana Painted wheel spats |
| EFL2085 |
Mini Funtana Wing tube |
| EFL2086 |
Mini Funtana Hook & loop tape |
| EFL2087 |
Mini Funtana Decals |
|
 |
|
| |
|
| |
 |
An all balsa and plywood model that flies as
good as it looks. Mini Funtana was designed for 3D flying on
a budget, but for people seeking to fly a traditional model
rather than a “foamy”
Covered in bright yellow Ultracote the plane is complete with
decals, a pre painted cowling and wheel spats, and carbon fibre
landing gear. A complete hardware pack is also included. All
designed to get you into in as least time as possible.
Here at last is an electric 3D model that is as much at ease
out of doors as it is indoors.
Put the Fun back into flying with a Mini Funtana! |
|
|
|