| |
 |
| |
|
| Wingspan: |
710mm (28inches) |
| Length: |
790mm (31inches) |
| Weight: |
410-470gm (14.5-16.5ounces) |
| Motor: |
Park 370 Inrunner or Park 400 Outrunner |
| Radio |
4channel with 3 sub-micro servos |
| Speed control: |
20-amp brushless |
| Prop size: |
12 x 6 (included) for inrunner or
10 x 4.7 - 11 x 4.7 with Outrunner |
| Gear Ratio: |
6.6:1, 0.4 Module (66T spur with 10T
pinion) gearbox (included) |
| CG (center of gravity): |
3-1/2 in (90mm) to 4 in (100mm) behind
the leading edge of upper wing |
| Hardware Included: |
Yes |
| Recommended Battery: |
11.1V 1200-1320mAh Li-Po |
| Approx. Assembly Time: |
4 - 6 hours |
|
 |
|
| |
 |
- Extreme 3D aerobatic performance
- Durable vacuum-formed foam fuselage
- Carbon fibre stiffeners and blade spar
- Attractive factory applied paint scheme
- Lightweight fibreglass cowl
- Pre-formed wheel spats
- Hardware pack included (wheels, links, etc)
- Comprehensive assembly guide
- Interlocking wing configuration
- Tinted canopy
|
|
|
|
| |
 |
| EFL2176 |
Ultimate
FX 3D Wing Set with Struts |
| EFL2177 |
Ultimate
FX 3D Fuse with Hatch/Rudder |
| EFL2178 |
Ultimate
FX 3D Horizontal Tail |
| EFL2179 |
Ultimate
FX 3D Cowl |
| EFL2180 |
Ultimate
FX 3D Wheel Pants |
| EFL2181 |
Ultimate
FX 3D Landing Gear Covers |
| EFL2182 |
Ultimate
FX 3D Hatch |
| EFL2183 |
Ultimate
FX 3D Canopy |
| EFL2184 |
Ultimate
FX 3D Landing Gear |
| EFL2185 |
Ultimate
FX 3D Pushrod Set |
|
|
|
| |
|
 |
| The Ultimate Fx offers 3D flying at its most
extreme. It features a resilient vacuum-formed fuselage, which
is stronger than profile foam and has a lot less flex. This
not only gives more precise control but it also enables the
Ultimate to fly better in slightly windier conditions. Carbon
fibre support stiffeners and blade spar with interlocking wing
configuration provide reinforcement and added strength when
flying in windier conditions. This makes for a very A high
visibility factory painted trim scheme, lightweight fibreglass
cowl and formed wheel spats give the Ultimate great looks to
match its extreme performance, and the reinforced flat foam
wings have ailerons on both the top and bottom wings giving
the Ultimate an extreme roll rate and excellent aerobatic performance.
With an assembly time of just four to six hours the Ultimate
FX represents outstanding value, and it’s the obvious
choice for pilots wishing to take their electric flying to
the very limit! Durable enough for outdoor flying, yet light
enough for indoor flight |
|
|
|
