| |
 |
| |
|
| Wingspan: |
965mm (38inches) |
| Length: |
760mm (30inches) |
| Wing Area |
14sq dm (215 sq inches) |
| Weight: |
440-480gm (15.5-17ounces) |
| Motor: |
Park370 BL Inrunner or Park400 BL
Outrunner (required) |
| Radio |
4channel or more |
| Servos |
4 Sub micro servos required |
| Speed control |
20amp brushless |
| Battery |
1320 Mah 2 – 3 Cell Li-Po (recommended) |
|
 |
|
| |
 |
- 5.33-1 Gearbox and 10x7 propeller
(included)
- One-piece wing, with single bolt mounting
- Preinstalled control horns
- Preinstalled push rods and tubes
- Preinstalled servo tray
- Prefabricated landing gear with
- painted wheel spats
- Hardware pack included
- Scale decals applied
- Moulded tail cone
|
|
|
|
| |
 |
| EFL2201 |
Cessna
182 Main Wing with Ailerons |
| EFL2202 |
Cessna 182
Fuselage with Rudder & Cowl |
| EFL2203 |
Cessna 182
Horizontal Tail |
| EFL2204 |
Cessna 182
Cowl |
| EFL2205 |
Cessna 182
Landing Gear w/spats |
| EFL2206 |
Cessna 182
Wing Struts |
| EFL2207 |
Cessna 182
Landing Gear Covers |
| EFL2208 |
Cessna 182
Fuselage Tail Fairing |
| EFL2209 |
Cessna 182
Pushrod Set |
| EFLM202 |
Pinion Gear
12T 0.4 Module 2mm ID |
| EFLM216 |
Gearbox
(V2) 5.33:1 0.4 Module |
| EFLM217 |
Spur Gear
(V2) 64T 0.4 Module w/shaft |
| EFLP1070 |
10x7 Slow
Flyer Prop |
|
|
|
| |
|
 |
Foam never looked as good, as it
does with the E-Flite injection-moulded Cessna 182!
It’s not often you find a 4 channel modern-era general
aviation subject in the world of small electric flyers, let
alone an officially licensed one that looks this good. Believe
it or not, two hours is about all it takes to be flight ready
as most of the time consuming work has been done for you. The
fuselage has the scale decals pre-applied, the pushrods and
control horns are pre-installed, and the cowl and wheel spats
come pre-painted. The steer-able nose gear is pre installed
and the main gear with fitted wheel spats just slips snugly
into a slot in the fuselage.
The one-piece foam wing with the hinges, ailerons and control
horns pre-installed comes with great looking wing-struts (complete
with fairings) that simply snap into place. Other scale details
are the corrugated surfaces on the ailerons and elevator, a
Cessna trademark! All that is left for you to do is to install
your motor and servos in the pre-cut servo trays. The trays
in the wing have plastic covers which provides a quick, neat
installation that won’t spoil the scale good looks of
this smooth flying, sleek looking, scale electric model. |
|
 |
 |
|
|
|
