| |
 |
| |
|
| Wingspan: |
900mm (35.5inch) |
| Length: |
900mm (35.5inch) |
| Weight: |
440-480gm (15.5-17ounce) |
| Motor: |
Park 450-Park400 (required) |
| Radio |
6 channel (for proper mixing) |
| Servos |
4 sub-micro (required) |
| Propeller |
11x3.8 slow flyer (required) |
|
 |
|
| |
 |
- Lightweight balsa-ply construction
- Transparent UltraCote/Lite covering
- Unlimited 3D performance
- Speedy assembly, typically 3-4 hours
- Light wing loading
- Aluminium landing gear
- Steerable tail-wheel
- Super light nylon/foam wheels
- Carbon fibre spars
- Enlarged control surfaces
|
|
|
|
| |
 |
| EFL2401 |
Wing with ailerons |
| EFL2402 |
Fuselage with rudder |
| EFL2403 |
Horizontal tail assembly |
| EFL2405 |
Landing gear |
| EFL2404 |
Pushrod set |
| EFL2406 |
Hardware set |
| EFL2407 |
Wheel set |
|
|
|
| |
|
 |
The CAP 232 is new style of electric profile
model constructed entirely from traditional balsa and light
plywood to minimise overall weight and maximise strength
and performance. The lightly loaded wing of the Cap 232 with
its enlarged control surfaces allows the model to perform
extreme 3D and outstanding freestyle aerobatics; combine
this feather-light construction with a high-power brushless
motor and you can really burn up the sky!
The superb UltraCote and UltraCote Lite see-through covering not only looks great
but adds to the overall impression of lightness, showing off the beautifully
detailed laser cut construction of the wing and fuselage. The bolt on aluminium
main gear, lightweight multi-spoke nylon wheels with foam tyres, and the steerable
tail-wheel give the CAP232 faultless ground handling.
This fantastic model comes 90% pre-built and includes carbon fibre pushrods,
a complete hardware pack, outrunner stick mount, and a fully detailed assembly
guide, making this a fast assembly model that combines the sturdy construction
of a balsa model, with all the virtues and unlimited performance of a lightweight
foam park flyer. |
|
 |
|
|
