| |
 |
| |
|
| Wingspan: |
1092mm(43inch) |
| Length: |
1028mm (40.5inch) |
| Weight: |
765-822gm (27-29ounce) |
| Motor: |
Park 480 BL outrunner (required) |
| Radio |
6 channel TX and micro RX (required) |
| Servos |
4 Sub-micro (required) |
| Propeller |
12x8 electric (required) |
| Speed control |
40Amp brushless (required) |
| Battery |
11.1Volt 3 cell 2100Mah
Li-Po (recommended) |
|
 |
|
| |
 |
- Generous, lightly loaded wing
- Tapered thickness airfoil
- Optional side force generators (SFG)
- Enlarged control surfaces
- Magnetic battery hatch
- Pre-painted fibreglass cowl and wheel spats
- Aluminium landing gear
- Steerable tail wheel
- Balsa-plywood construction
- UlatraCote covering
- Hardware pack and assembly guide
- Outrunner ready bulkhead
|
|
|
|
| |
 |
| EFL2426 |
Wing with Ailerons |
| EFL2427 |
Fuselage with Hatch |
| EFL2428 |
Tail Set |
| EFL2429 |
Pushrod Set |
| EFL2430 |
Main Landing Gear |
| EFL2431 |
Fuselage Hatch |
| EFL2432 |
Canopy |
| EFL2433 |
Cowling |
| EFL2434 |
Wheel Pants |
| EFL2435 |
Wing Tube |
| EFL2436 |
Side Force Generators |
| EFLA219 |
Steerable Tailwheel Assembly |
|
|
|
| |
|
 |
The Mini FuntanaX is an updated version
of the earlier Mini Funtana. It has been virtually redesigned
with many additional features that give it stunning performance.
New features include a twenty-six percent increase in wing
area to reduce overall wing loading, along with a tapered
thickness airfoil, large wing fillets, optional and removable
Side Force Generators (SFG) for superior knife-edge flight,
large control surfaces for improved aerodynamic performance
and superb all-round manoeuvrability.
The model is constructed entirely from laser cut balsa and light plywood for
an accurate lightweight airframe, and the newly designed colour scheme using
UltraCote covering with its own unique graphics adds a dynamic look to the Mini
FuntanaX
The tinted canopy, factory painted fibreglass cowling and wheel spats, painted
aluminium landing gear further enhances these great looks. Thanks to the magnetic
battery hatch, access to the battery is both quick and easy with no need to remove
the wing to change batteries after each flight, and the motor bulkhead is designed
to accept a brushless outrunner motor without further modification, E-flite’s
Park 480 brushless outrunner is an ideal choice.
The illustrated assembly guide and comprehensive hardware pack means that basic
assembly can be completed in about four hours, so the model can be fully completed
and ready to fly in just a few evenings. |
|
 |
| |
|
