Wingspan: 1090mm(43inch)
Length: 1065mm (42inch)
Wing Area 26.7 sq sm (414 sq in)
Weight: 795-820g (26-29ounce)
Motor: Park 480 (required)
   
 
 
  • Light wing loading for excellent slow speed 3D flights
  • Designed for E-flite’s park 480 BL outrunner
  • Lightweight balsa/ plywood construction
  • Steerable tailwheel for great ground handling
  • Optional Side Force Generators
  • Two-piece wing for easy transport and assembly
  • Pre-painted fibreglass cowl and wheel spats
  • Pre-painted aluminium landing gear
  • Easy access magnetic battery hatch
  • Ultracote® covering and graphics
 
 
 
Large Replacement Parts:
EFL2501 Wing Set with Ailerons
EFL2502 Fuselage
EFL2503 Tail Set
EFL2504 Main Landing Gear
EFL2505 Cowling
EFL2506 Wheel Pants
EFL2507 Pushrod Set
EFL2508 Side Force Generators
EFL2510 Canopy
EFL2511 Battery Hatch
EFL2512 Receiver Hatch
EFL2513 Wing Tube
Small Replacement Parts:
EFLA200 Micro Control Horns
EFLA203 Micro Control Connectors
EFLA219 Steerable Tailwheel Assembly
EFLA222 Foam Park Wheels, 44mm
EFLA213 E-flite/JR/Horizon Decals
   
 

Needed to complete:
E-flite Park480 1020kv (EFLM1505)
Li-po battery 3S 11.1Volt 2100mAh(EFLB21003S)
40 Amp speed control (EFLA312)
E-flite S75 sub micro servos x4 (EFLRS75)
6 channel radio for proper mixing –Spektrum DX7 (SPM2712E/SPM17121E)

 


Designed by top aerobatic pilot Mike McConville the Mini ShowTime 4D has an astounding flight performance and striking good looks. What makes this model so different to all the other electric models on the market today are the removable Side Force Generators. These are fitted to the wings and make extreme knife edge flight possible, giving extra rudder authority and control to perform a virtually limitless display of hanging on the prop 3D manoeuvres and precision aerobatics.

Also contributing to the ShowTime’s extraordinary performance is the lightweight laser cut balsa and plywood wood construction and pre-painted aluminium landing gear.

Finished in a show stopping colour scheme using Ultracote® the ShowTime 4D not only looks good in the air - it looks good sitting on the ground. Contributing to these great looks it comes complete with a pre-painted fibreglass cowling, wheel spats and includes all the hardware you need to finish the model.

Access to the battery pack is via a magnetic hatch allowing for quick changes between flights, and if powered with a Park 480 outrunner the performance will take your breath away. The plane is 90% complete straight from the box so that all that remains for you to do is install your electronics and in a couple of evenings you can be ready to put on a show!