| |
 |
 |
| |
|
| Wingspan: |
900mm (35.5inch) |
| Length: |
930mm (36.5inch) |
| Wing Area |
26.5 sq dm (410 sq in) |
| Weight: |
425-455gm (15-16ounce) |
| Motor: |
Park 400 or Park 450 |
| |
|
|
 |
|
| |
 |
- Light wing loading for excellent flight characteristics
- Open framework structure for lightness
Tapered thickness airfoil for improved handling
- 90% Pre-built and covered with Ultracote®
- Pre-drilled control horn mounts
- Pre-painted wheel spats
- Outrunner stick mount included
- Complete hardware pack and assembly guide
- Enlarged control surfaces
|
|
|
|
| |
 |
| |
| Large Replacement Parts: |
| EFL2601 |
Wing with Ailerons |
| EFL2602 |
Fuselage with Rudder |
| EFL2603 |
Horizontal Tail Assembly |
| EFL2405 |
Landing Gear |
| Small Replacement Parts: |
| EFL2604 |
Pushrod Set |
| EFL2605 |
Hardware Set |
| EFL2606 |
Wheel Set |
| EFL2607 |
Wheel Pants |
| EFLA213 |
E-flite/JR/Horizon Decals |
| EFLM1915 |
Outrunner Stick Mount |
| |
|
|
|
|
| |
 |
E-flite Park400-Park450 (EFLM1300, EFLM1400)
Li-po battery 3S 11.1Volt 910-1320mAh (EFLB12503S)
20 Amp speed control (EFLA311)
E-flite S75 sub micro servos x4(EFLRS75)
6 channel radio for proper mixing: DX6i (SPM6600E)
|
|
|
|
|
|
|
The Edge 540 BP 3D combines the sturdy construction of a balsa/lightweight plywood airframe together with all of the uninhibited 3D abilities of a lightweight electric profile park flyer. This is made possible by the superbly engineered open structure design that keeps weight to a bare minimum while providing all the durability and structural integrity of a solid wooden airframe. This feather-light construction, combined with a high-output brushless motor, will provide spine tingling 3D and freestyle performance that allows pilots to really push the limits.
It comes from the factory 90% pre-built and covered with UltraCote® in a striking see through red and yellow colour scheme, with the easy to follow assembly guide and included hardware pack this model can be ready to fly in as little as three to four hours. |
|
 |
|
|
