Eflite - Ascent 450
Ascent 450   
Ascent ARF

E-Flite brings you the perfect model for those lazy summer evenings, or days with nice gentle breezes, the “Plug and Play” motor assisted Ascent 450 Glider.
The Ascent 450 comes almost ready to fly right out of the box 95% pre-built with a 450 Brushless motor complete with 11x6 low-drag folding propeller, 9gram sub-micro servos and 22Amp brushless speed controller pre-installed, and requires only your transmitter, receiver, battery and charger to complete the package. The model features a lightweight painted fibreglass “pod and boom” fuselage with high visibility transparent Blue and White Ultracote covered wings and tail plane ensuring that you wont loose sight of it in the sky, whilst also showing off the internal construction of the wing.
Getting ready to fly could not be easier, just remove the tinted canopy and install your receiver, charge your flight battery pack, attach the tail plane and two-piece bolt-on wing and your ready to go, its as simple as that.
Compact enough for any large park, the Ascent is a wonderful model for experienced park or slow flyers that want to try powered motor gliders, offering as it does very gentle flight characteristics coupled with slow walking pace landing speeds.

This is the perfect model for park flying, being light, bright and very easy to fly!

Apprentice
Image Gallery Action Gallery
Action Gallery Ascent 450 Manual
Tech Spec
  Wingspan 1370mm (54 inch)
Length 825mm (32 inch)
Flying Weight with Battery 510 - 540g (18-190unce)
Motor 450 Brushless outrunner 890Kv (installed)
Servos Micro 9grams (installed)
Speed Controller 22Amp brushless ESC (installed) with brake
Battery 3S 11.1Volt1250Mah (required)
Radio 3channel or more
End Tech Spec
 
Features
  • Pre-painted fibreglass fuselage
  • High-performance 11x6 folding low-drag propeller
    22Amp Speed controller
  • Two 9gram sub-micro servos pre-installed
  • Pre-hinged control surfaces with fitted control horns
  • Transparent Ultracote covering and trim
  • Built up balsa wing and tail plane
  • Two-piece bolt on 54inch wing
  • 15 minutes plus flight time
  • Rapid assembly time 1-2 hours typical
End Features
 
Spares
  EFL2701 Wing Set
EFL2702 Fuselage
EFL2703 Tail Set
EFL2704 Canopy
EFL2705 Wing Tube
EFL5002 9.6v 700mAh Flat NiCD
EFLM7220 Ascent Brushless Motor BL450 890KV
EFLM72201 Outrunner Shaft for EFLM7220
EFLA7320 Ascent 22amp Brushless ESC
End Features
 
Pirep
End Pirep
Quicktime Dialup
Quicktime broadband
Windows Media dialup
Windows Media broadband
Bottom Navigation
Return to the start of the section Go to the top of the page