T-28 TROJAN


ParkZone’s latest ready to fly model is the magnificent T28 Trojan, the U.S.A’s piston engined military trainer during the 1950’s and 60’s. The main components are constructed from highly durable Z-Foam, a very versatile material that can soak up the minor bumps and dings that may occur during use.

Ready to fly straight from the box, the T28 comes with many innovative features not normally found in ready to fly electric models. These include a reusable fully proportional five channel ZX10 radio with industry standard three wire servos, 480 outrunner brushless power system, 25Amp electronic speed controller, high power Li-Po battery pack, and a variable rate DC balancing Li-Po charger. In fact everything you need to fly is included in the one box, there is no need to make any additional purchases. Another key feature of this highly detailed scale model is the tricycle landing gear with steerable nose leg. This means of course that with the powerful 480 brushless motor up front scale take off’s and landings may be performed with ease.

The T28 is finished in an authentic US Navy colour scheme of red and white with pre-applied Navy graphics, the motor cowling has rotary engine detail moulded in, and the crystal clear frameless canopy is complete with scale painted pilot figure. Thanks to the extensive pre-fabrication ParkZone have made it possible to buy and fly a scale model with outstanding performance within a few hours of purchase, with the T28 Trojan, you get it all!

 

 EVERYTHING YOU NEED TO GET AIRBORNE

batts
Control is supplied by the ZX10 fully proportional five channel radio, a completely re-usable system with industry standard three wire servos. Drive power for the T-28 is supplied by a 3-cell 1800 mAh Li-Po battery.
charger
 SPARES LIST
PKZ1011 Prop Adaptor PKZ4413 Clear Canopy & Hatch with Painted Pilot
PKZ1012 Propeller PKZ4415 Instruction Manual
PKZ1031 11.1V 1800mah Li-Po Battery PKZ4416 480 Brushlss Outruner Motor 960KV
PKZ1030 11.1V 2100mah Li-Po Battery PKZ4417 Instruction Manual PNP
PKZ1040 2-3 Cell DC Li-Po Balancing Charger PKZ4420 Painted Wing (No Servo)
PKZ1063 Servo Y-Harness PKZ4422 Pushrods with Clevis
PKZ1081 SV80 Long Lead 3-wire servo PKZ4425 Horizontal Tail with accessories
PKZ1090 DSV130 3 Wire Digital Servo Metal Gear PKZ4426 Cowl
PKZ4403 Decal Sheet PKZ4428 Motor Mount w/Screws
PKZ4406 Main Landing Gear PKZ4467 Bare Fuselage Painted
PKZ4407 Nose Gear Set EFLA1025 25Amp Pro Brushless ESC


profile
 
nose
 KEY FEATURES

  • Ready to fly straight from the box
  • Reusable 5 channel ZX10 radio with 3 wire servos
  • Tricycle landing gear with steerable nose leg
  • 11.1 Volt 1800Mah Li-Po battery for high
    performance and duration
  • Variable rate DC balancing Li-Po charger
    480-960Kvolt brushless outrunner power system
  • E-flite 25Amp brushless speed controller
  • Durable Z-foam construction
  • Authentic paint scheme, decals and pilot figure
 TECH SPEC

PKZ4400  
Wingspan: 1118mm(44inch)
Length: 914mm (36 inches)
Weight: 875gm (30 ounces)
Speed control: E-flite® 25A brushless (EFLA1025)
Motor: PKZ 480 960Kv outrunner brushless motor
Radio: 35MHz 5+ channel FM proportional ZX10
Servos: Four 3-wire servos
Trim Scheme Colors: White fuselage and wing with orange, black and
blue decals
Prop Size: 9.5 x 7.5
Recommended Battery: 3-cell 1800mAh Li-Po battery (PKZ1031) included
Aileron: Proportional
Elevator: Proportional Rudder
Throttle: Proportional
Approx. Flying Duration: 12-15 minutes on
1800mAh Li-Po
Approx. Assembly Time: 20 minutes
Available Frequencies: Ch61 35.010
Ch64 35.040
Ch68 35.080
Ch72 35.120
Ch80 35.200
Charger: 2-3 cell DC Li-Po charger
Landing Gear: Trciycle with steerable nose wheel
box
Click here to download the Trojan manual   manual