Aircraft Telemetry Extension Leads

305mm SPMA9551
610mm SPMA9552

Spektrum Flight Log SPM9540

Flight Log was a device originally used by the Spektrum development engineers during system testing. They realised however what an asset the information that it was giving them could be to modellers, and so now it has been released as an accessory.

It gives a clear read-out of data collected during flight and with some of the more demanding and performance oriented models available today can be an invaluable asset ensuring confidence that the radio system is working correctly and that installation of the receivers is delivering optimum performance. 

Flight Log records the number of fades experienced by each individual receiver during the flight as well as any system frame losses or failsafes (holds). In addition it allows you to view the real time voltage being supplied by the on board batteries to the receiver to ensure that levels are adequate before taking off again.

Flight log can be installed permanently into the planes fuselage and plugged into the receivers data port at all times, or can be just plugged in to view data once the plane has landed and the flight is over. 

• Real-Time Voltage Digital Display
  
• Records Individual Antenna Fades
  
• Records Frame Losses
  
• Records Failsafes (Holds)

SPMVR6007
VR6007 Voltage Regulator 7.5A, 6V

The VR6007 is designed for giant scale aircraft to regulate voltage to 6 volts (up to 7.5 continuous). The addition of the soft switch allows the unit to be turned off without effecting amp draw. For high current needs the VR6007 comes with 16 AWS leads with EC3 connectors. Spektrum's VR6007 model has factory matched voltage outputs, connecting two of them through a single receiver will evenly draw from both batteries.

Key Features

• 6.0 voltage output
  
• Capable of handling 7.5 amp continuous current Amp
  
• Factory matched voltage output
  
• Includes cooling fan that allows for reliable amp draw capability
  
• 16 AWG leads with EC3 connectors
  
• Soft switch

SPMVR6010 Voltage Regulator 10A, 6V

For current hungry applications as in large scale models that utilise multiple high current-draw servos, the VR6010 provides an ideal solution to managing voltage supply. Providing a continuous 6 volt 10 amp supply the VR6010 can be used to step down supply to power the on board radio system from high capacity 2-cell LiPos or 5 to 8 cell Ni-MH packs.

A single VR6010 regulator provides 10 amps continuous current (16 amp peaks) making it ideal for most high-current draw applications, but for heavy duty applications two VR6010’s can be used to provide 20 amps continuous and up to 32 amps peak power.

The VR6010 is fitted with EC3 connectors and is ideally suited used singularly or as a pair in conjunction with Spetrum’s AR9100 series PowerSafe receiver.

Key Features

• Brings higher voltage packs within the operating limits of most servos
  
• Delivers a steady 6 volts ensuring consistent performance throughout the discharge cycle of the battery
  
• Includes a fail-on switch and 16-gauge heavy duty input and output wires with EC3 connectors
  
• Drop in addition for the AR9100
  
• Cooling fan provides additional current handling capability
  Convenient mounting lugs

Specifications