| |
 |
Compatible with DX6 and DX7
At only 7 grams, the AR6000 receiver is specifically designed
for lightweight, electric powered planes and helicopters delivering
better range than any other receiver in its class.
- Dual Link™ (pat pending) incorporates two receivers
in one
- Ultralight 7 grams
- Compact design 39 x 39 x 9mm
- SmartSafe fail-safe prevents motor start up if Tx is off
and gives low
throttle if the signal is lost
- Short 95mm antennas for mounting convenience
- Easy bind plug
|
|
 |
 |
Weighing in at only 3.5 grams and 19mm x 30mm x 9mm (WxLxH)
in size, the AR6100 is the ultimate 2.4GHz receiver for all small
electric powered planes from ultralight flyers and foamies to
400 class helis. Because it uses advanced DSM2™ technology
it is only compatible with the newDSM2™ aircraft systems but it
of course has the improved response time that the improved version
of DSM system offers. It has a wide input range that allows it
to operate with 3.5- to 9-volt electrical systems.
- Dual Link™ (pat pending) incorporates two receivers
in one
- Lightweight at 3.5 grams
- DSM2 Modulation
- Compatible only with DSM2 radios
- 6 Channel
- Compact design 19mm x 30mm x 9mm
- Short 29mm antennas for easy mounting
|
|
| |
 |
The AR6100e Microlite Receiver is already the lightest 2.4GHz park flyer receiver with standard-sized connectors you’ll find anywhere, but for an alternative mounting and connection layout the 6110e has the same standard-sized connections turned through ninety degrees into an end-on format.
Using Spektrum’s DSM2 technology the 6100e offers all of the intelligent advantages like ModelMatch™ and ServoSync™ and will operate on a wide input range that allows it to operate with 3.5 to 9 volt electrical systems. As with all Spektrum’s micro receivers the 6100e’s small size and light weight enhances both flight performance and duration.
- 6 Channels
- DSM2 Modulation
- Compatible only with DSM2 radios
- Band: 2.4GHz
- Dimensions (WxLxH): 19 x 40 x 9mm
- Weight: 4.4 g
- Input Voltage Range: 3.5V–9V
|
|
 |
 |
For weight conscious applications in aircraft up to six channels
requiring full range capability the AR6200, weighing in at
just ten grams, provides a great solution. Featuring DSM2 this
receiver uses Dualink technology to simultaneously gather information
from its two receivers, and then uses Spektrum’s patent-pending
software to combine the data into an accurate, vivid picture
of the RF signal. Having the two individual units sited around
the plane, and with differing orientation means exposure to
multiple RF environments ensures a bulletproof solid link in
all conditions.
- Type: Full Range Aircraft Receiver
- 6 Channels
- Internal and remote receiver
- DuaLink™
- ModelMatch™ prevents flying a model
using the wrong model memory (feature does not work with
module systems)
- ServoSync™ (feature does not work
with module systems)
- SmartSafe™ fail-safe system
- Dimensions:(WxLxH)21.6mm x 30.1mm x 12.3mm
- Weight:10g
- Voltage Range: 3.5V-9.6V
- Antenna Length:(2) 30mm
|
|
 |
 |
The AR6300 is the perfect receiver for all types of indoor craft. Whether installed in a lightweight 3D foamie, a micro helicopter or an indoor slow flyer the benefit of Spektrum’s DSM2 technology will deliver superior response and interference protection. Of course its small footprint makes installation easier but tipping the scales at just 2 grams using the AR6300 will also ensure better flight performance and longer flying times.
Fitted with JST connectors makes the 6300 compatible with most popular sub-micro servos including Spektrum’s programmable DSP60J Digital Super Sub-Micro servo. (SPMDSP60J)
- 6 Channels
- DSM2 Modulation
- Band: 2.4 GHz
- Dimensions (WxLxH): 18.5mm x 28.4mm x 6.9mm
- Weight: 2 g
- Input Voltage Range: 3.5V–9V
|
|
| |
 |
The AR7000 dual receiver is at the core of the DX7’s sturdy
RF link. Comprising two individual receivers joined by a 150mm
lead, each receiver has an independent view of the signal environment.
Data collected by each receiver is processed by patent pending
Spektrum software, and combining the two streams results in the
most accurate ‘picture’ of an RF signal ever produced.
From a purely practical point of view both receivers collect
their signals via very short 75mm aerials making it unnecessary
to have them exposed externally so making installation much easier.
- 7 Channels
- External and internal receiver
- Dual Link™
- Model Match (prevents flying a model using the wrong model
memory)
- Servo Synchronization™
- SmartSafe™ fail-safe system
|
|
 |
 |
The AR7100 and AR7100R offer the benefits of Spektrum DSM2 technology as well as placing multiple traditionally formatted components in one compact unit, keeping your installation neat and simple.
- Internal 5.2V 2A regulator for rudder and Aux 2 (for Gyro)
- Has both regular straight-through input-output connections and an internal 5.2V 2A regulator for the gear and throttle channels
- Includes one internal receiver and one remote receiver with a port for an optional second remote receiver
- Compatible with all Spektrum and JR DSM2 radio and module systems
- Two failsafe modes
- Fail-on switch included
- Integrated RevLimit™ RPM limiter with revolutionary backplate sensor for glow engines
- Internal 5.2V 2A regulator for rudder and Aux 2 (for Gyro)
- Has both regular straight-through input-output connections and an internal 5.2V 2A regulator for the gear and throttle channels
- Includes one internal receiver and one remote receiver with a port for an optional second remote receiver
- Compatible with all Spektrum and JR DSM2 radio and module systems
- Two failsafe modes
- Fail-on switch included
|
| Click for more information on the AR7100 and 7100R |
|
 |
 |
By combining two internal, alongside one further remote receiver,
the AR9000 has the capability of performing the most sophisticated
monitoring of the RF environment yet seen in aero modelling
to date. In addition one remote receiver can be added to
increase that capability even further.
Spektrum radios simultaneously transmit on two frequencies and
this combined with multiple receiver locations result in unmatched
monitoring of the RF environment providing optimum path diversity
and a more secure radio link.
This option is particularly useful in large scale aircraft and
jets where remote receivers can be easily sited around the plane
to increase the RF ‘eyes’ of the system and avoid
the kind of problems encountered with installation of more conventional
systems. To facilitate the sheer physical size of some of these
planes remote receiver extension leads for the remote receivers
are available in 150mm,230mm, 305mm,610mm and 915mm lengths.
The Spektrum Flight Log (SPM9540) is compatible with the AR9000
receiver. Whilst the plane is being flown it logs data about
the overall performance of the RF link as well as individual
data from the main and remote receivers. Once the plane lands
this data can be reviewed and used to optimise the receiver installation.
It also gives an indication as to the level of 2.4GHz “noise” present
in the flying environment, and displays the receiver voltage
so you can be sure that power capacity is sufficient for the
next flight.
Neither the Flight Log or the optional remote receiver are actually
essential for the AR9000 to operate but with more complex models
they can be of great benefit. All models are different, and each
can present unique problems which customised radio installation,
assessed by hard data can help to eliminate.
- 9 Channels External and
Internal Receiver
- DuaLink™
- ModelMatch prevents flying a model
using the wrong model memory (feature does not work
with module systems)
- ServoSync™ (feature does
not work with module systems)
- SmartSafeÊ fail-safe
system
- Dimensions: (WxLxH) 34.3mm x 52.5mm x 14mm
|
|
 |
 |
| Click for more information on the AR9100 |
|
Aimed at larger giant scale and jet models that utilise high power high torque power hungry servos the Spektrum Powersafe combines the roles of both receiver and power control centre. The unit itself isn’t actually a receiver, rather it’s a robust power bus designed specifically to handle high current loads. From a safety standpoint power input can come from two batteries via twin 16 AWG input leads and EC3 connectors making a truly redundant dual battery system. Another feature with safety in mind is the soft switch. Servo current is routed around the switch so, should it fail for any reason, power to the system will not be interrupted.
The AR9100 is a full range system uniquely featuring a main unit that houses the power bus providing up to 35-amps continuous and 50-amps peak current to power the model’s system. Three remote receivers linked by 23, 30 and 60cm remote receiver extensions constantly monitor the RF environment and in larger and more complex models an additional fourth receiver can be added (SPM9545 - sold separately), increasing even further the units ability to constantly monitor the RF environment. Through extensive testing Spektrum engineers discovered that mounting the receiver in the typical location at the end of the servo and battery proved not to be the optimum location to provide the clearest RF signal, hence the remote location of the 9100’s receivers . The dual path redundancy of Spektrum's DuaLink™ technology, plus the fact each of the receivers is mounted in a slightly different location exposing them to a different view of the RF environment and creates a bullet-proof RF link in all conditions.
|
- True dual battery redundancy - each battery is isolated and if one
fails/shorts the other takes over.
- Utilises up to 4 remote receivers for the ultimate RF link in even the most demanding applications.
- Up to 35 amps continuous and 50 amps peak current handling capability
- Soft switch fails-on if the switch is damaged
- Two types of failsafe - Smartsafe (throttle only) and conventional failsafe (all servos)
- Instant-on reconnect - if a power interruption (brown out) occurs the
- system reconnects in less than 1/2 second
- Flight Log compatible
- Heavy 16awg dual battery leads with pre-wired E-flite® EC3 connectors
- Compatible with all Spektrum and JR® full range radio systems
|
|
|
 |
 |
The remote receiver can be used as a replacement for the AR6200,
AR7000 and the AR9000 remote receivers. It can also be used
as an optional fourth remote receiver with the AR9000. Using
multiple receivers situated around the model means even more
of the RF signal can be monitored, thus offering unequalled
security in the air.
The remote receiver includes one300mm extension; however,
various lengths of receiver extensions are available to accommodate
all sizes of planes and installation needs.
| 150mm |
SPM9010 |
| 230mm |
SPM9011 |
| 305mm |
SPM9012 |
| 610mm |
SPM9013 |
| 915mm |
SPM9014 |
|
| Type: |
Remote Receiver for SPMAR6200, SPM6070, SPMAR9000, SPMAR9100 |
| Modulation: |
DSM2 |
| Band: |
2.400-2.4835GHz |
| Dimensions: |
(WxLxH): 22.6mm x 24.8mm x 6.9mm |
|
|
| |