 |
Dedicated retract servos,
available in either mini, standard size or in a low profile
version for use where the wing section is too thin to
accommodate a normal servo. Each servo features metal
gears with ball raced output shafts with 185degree sweep,
and very high torque to operate mechanical retracts
effortlessly. |
|
| Suitable for use in most models
that use a mechanical retracts system, they may be used
as a single unit in smaller models with lighter landing
gear, or in larger models it is recommended to use two
servos, one to operate each landing gear leg. Typical
applications would include the Hangar9 warbird range,
and in particular the Hangar9 150 P51 Mustang and 150
P47 Thunderbolt. |
|
 |
|
 |
| Weight |
16.2grams
/ 0.59oz |
| Torque at 4.8V |
2.5kg/cm / 40oz/in |
| Torque at 6.0V |
3.4kg/cm / 48oz/in |
| Speed at 4.8V |
0.17sec / 60deg at
no load |
| Speed at 6.0V |
0.15sec / 60deg at
no load |
| Size (mm) |
26 x 13 x 26 |
| Size (inch) |
1.16 x 0.51 x 1.02 |
| Gear Type |
Metal |
| Ball bearing |
One Ball Bearing on
top |
| Travel Range |
185deg |
|
|
 |
| Weight |
34grams
/ 1.19oz |
| Torque at 4.8V |
4.1kg/cm / 85oz/in |
| Torque at 6.0V |
7.8kg/cm / 108oz/in |
| Speed at 4.8V |
0.31sec / 60deg at
no load |
| Speed at 6.0V |
0.24sec / 60deg at
no load |
| Size (mm) |
42 x 21.5 x 22 |
| Size (inch) |
1.65 x 0.85 x 0.87 |
| Gear Type |
Metal |
| Ball bearing |
One Ball Bearing on
top |
| Travel Range |
185 deg |
|
|
