 |
|
Quick Links |
|
| Clevises are made from spring steel with precision stamped centre pin providing extra security meaning this is a strong and reliable clevis for connection from servo & control horns providing positive free movement with no binding. |
HFL5000
HFL5001 |
M2 Metal Quick Link (Pk2)
M3 Metal Quick Link (Pk2) |
|
|
| |
 |
|
Quick Links Adaptors |
|
| Treaded couplers for soldering or gluing onto steal or carbon rods to make up push rods so that an adjustable clevis may be used. Available in M2 or M3 threads to suit your linkage system. |
HFL5005
HFL5006 |
M3 Quick Link Adapter (Pk2)
M2 Quick Link Adapter (Pk2) |
|
|
| |
 |
|
Mini Snap Links |
|
Economical plastic snap-links that screw onto cable link adapters or 2mm threaded rods. Ideal for connecting the carburettor throttle lever-preventing interference if metal clevis were used, i.e. metal-to-metal. |
| HFL5010 |
Mini Snap Link Plastic (Pk4) |
|
|
| |
 |
|
Quick Keepers |
|
| Low cost, lightweight moulded nylon keeper for the secure connection of plain metal control rods. Make a 90 degree bend in the wire, push through horn or servo arm, keeper pushes on to bent end of the wire and moulded slot clips onto the push rod. |
| HFL5011 |
Quick Keeper Plastic (Pk4) |
|
|
| |
 |
|
Bowden Cable |
|
| A low friction muti-strand cable and nylon outer tube combination without end terminals that is ideal for making up throttle linkages. |
| HFL5013 |
Bowden Cable Inner & Outer 1 metre (Ea) |
|
|
| |
 |
|
Mylar Hinge Strip |
|
| Create your own cost effective hinges by simple cutting your own size of hinges from this durable Mylar strip. |
| HFL5015 |
Mylar Hinge Strip 1 meter strip (Ea) |
|
|
| |
 |
|
Ball Links |
|
| Ball link snap in type or the metal threaded ball link provide articulation in all directions and are particularly useful where it is difficult to line up actuation rods exactly. They are available in various sizes with the M3 version being heavy duty an ideal connection on the carburettor throttle lever. |
HFL5025
HFL5026
HFL5027
HFL5028 |
M2 Ball link Snap in type with M2 nut (Pk4)
Ball link with 8BA hole (Pk8)
M2 Metal thread Ball link with M2 nut (Pk4)
M3 Metal thread Ball link M3 nut (Pk4) |
|
|
| |
 |
|
Push Rod |
|
| M2 standard push rods are available in nine inch lengths and are perfect for most models, the eight inch M3 rod is manufactured to the same high quality as the more popular M2 size but with the additional strength and security that the M3 rods provide. A wise choice for larger and heavier models, or models subject to high loads and stresses. |
HFL5030
HFL5031 |
M2 Push Rod 228mm (9 inch) (Pk5)
M3 Push rod 200mm (8 inch) (Pk5) |
|
|
| |
 |
|
Brass Studding |
|
The M2 x 25mm brass studding use for connection of links to plastic snakes. |
| HFL5032 |
M2 x 25mm Brass Studding (1 inch) (Pk4) |
|
|
| |
 |
|
Push Rod Connectors |
|
| |
| HFL5039 |
Metal Push Rod Connectors (EZ)(2) |
|
|
| |
 |
|
Close Loop Wire |
|
A complete closed loop system that contains everything the modeller needs to install and operate surface controls by the “push pull” closed loop method. Included in the pack are, three metres of nylon covered wire, aluminium ferules, brass threaded wire to clevis connectors, nylon wire guides, plated 2mm clevises, black nylon double sided control horn, and illustrated installation guide.
These closed loop systems offer the most precise method of control with no slop in the link between servo and control surface, and they are can be used with many for elevator control. |
HFL5033
HFL5034
HFL5035
HFL5036
HFL5037
HFL5038 |
M2 Extender (2)
M3 Extender (2)
Close loop wire 1metre
Close loop wire ferrules (Pk6)
M2 Closed loop extender (Pk4)
Complete close loop set |
|
|
| |
 |
|
Nylon Pinned Hinges |
|
The ultimate in hinge security, these flat nylon pinned hinges offer convenience and ease of fitting. They fit into pre-cut slots in the control surface and are held in place with either 5-minute epoxy, or hinge glue, thanks to their design, the pin may be removed and the control surface removed from the model for repairs or painting etc.
Available in three sizes, small, medium and large for all types of models. |
HFL5150
HFL5151
HFL5152 |
Small Nylon Pinned Hinges (10)
Medium Nylon Pinned Hinges (10)
Large Nylon Pinned Hinges (10) |
|
|
| |
 |
|
Round Pivot Hinges |
|
| The ultimate in security and ease of fitting these pivot hinges feature nylon barbed arms, hinged with a metal pin that simply mount to the control surface via a pre-drilled hole. When used with slow cure epoxy these hinges allow maximum time to align the control surfaces for correct clearances and friction free movement. Available in pack of six, and in different lengths and diameters from 33mm to 67mm, they are suitable for use in all but the smallest model, right up to 1/4 scale models. |
HFL5140
HFL5141
HFL5142
HFL5143 |
Hinges Length 33mm (6)
Hinges Length 43mm (6)
Hinges Length 48mm (6)
Hinges Length 67mm (6) |
|
|
| |
 |
|
CA Hinges |
|
| Packs of 12 CA Hinges that make hinging control surfaces easier than ever, make a simple slot with a hobby knife, slide the C/A Hinge in place, fit the control surface and apply thin Cyano glue to the hinge, this wicks into the hinge material and secures the hinge in place, available in three sizes, small, medium, and large to suit most models. |
HFL5160
HFL5161
HFL5162 |
CA Hinges Small (12)
CA Hinges Medium (12)
CA Hinges Large (12) |
|
|
| |
 |
|
Pro Linkage Rods |
|
| The very best in control linkages, these machined aluminium linkage rods are ideal for linking the servo to the control surface, when used with a 3mm ball-link they offer a safe, secure, and no slop linkage that is ideal for today’s high-performance models. They come in packs of two and in various lengths including, 70mm-80mm-90mm-100mm-110mm-120mm-130mm, and 140mm. |
HFL5301
HFL5302
HFL5303
HFL5304
HFL5305
HFL5306
HFL5307
HFL5308 |
Linkage Rods M3x70mm (2)
Linkage Rods M3x80mm (2)
Linkage Rods M3x90mm (2)
Linkage Rods M3x100mm (2)
Linkage Rods M3x110mm (2)
Linkage Rods M3x120mm (2)
Linkage Rods M3x130mm (2)
Linkage Rods M3x140mm (2) |
|
|
| |
 |
|
Canopy Latch |
|
This handy sprung loaded latch is simple to mount, and easy to use, and provides a very neat solution to securing hatches, canopies, etc to your model. |
| HFL5210 |
Canopy Latch Sprung (1) |
|
|
| |
 |
|
Ball Link |
|
| Ball links provide articulation in all directions and are particularly useful where it is difficult to line up pushrods exactly. They are available in various sizes, either 2mm small, 2mm medium, and 3mm large, each makes an ideal connection on the carburettor throttle lever, or other control surfaces. |
HFL5401
HFL5402
HFL5405 |
Ball Link 2mm Small (2)
Ball Link 2mm Medium (2)
Ball Link 3mm (2) |
|
|
| |
 |
|
Stand-Off Ball Link |
|
| Machined brass stand-off ball joints with a nylon connector in either 2mm or 3mm, to take the nylon connector, the ball joints are ideal for use on any type of model where a small distance is required between the joint and the control surface. |
HFL5408
HFL5409 |
Stand-Off Ball Link 2mm (2)
Stand-Off Ball Link 3mm (2) |
|
|
