 |
|
Brushed Motors |
|
High Quality Brushed Motors that are fully ball raced and use rare earth magnets that maintain their efficiency even when subject to high heat. They have adjustable timing, large brushes and commutator with high quality springs. The purpose of these is to provide good contact for the brushes on the commutator at high rpm.
These motors have very good “efficiency” meaning that they can turn much of the electricity going into them into power to the propeller. |
| |
|
Diameter
Case Length
Cells
Rev Per Volt HFL3000
Rev Per Volt HFL3001 |
24mm
25mm
6-10 N-cd/NiMh,
2-3 cells lipo
- Kv-4145rpm
- Kv-5026rpm |
|
HFL3000
HFL3001 |
Brushed 370 Motor, Kv4145
Brushed 370 Motor, Kv5026 |
|
|
| |
 |
|
Brushed Speed Controller |
|
A lightweight electronic speed controller with all functions being micro processor controlled. It has an automatic set-up feature eliminating the need for manual adjusted potentiometer during the installation process.
Complete with Bec providing the receiver and servos with a 5-volt supply direct from the drive battery which eliminates the need for a seperate receiver battery.
Working Voltage
5-10 Nicad Cells
Continuous Working Load
50A
Weight
47gm
Bec
5v/1A
Low Battery Cut Off
5v
Dimensions
44mm x 21mm x 11mm |
| HFL3500 |
Flightline 50 amp with Bec speed controller |
|
|
| |
 |
|
Complete Gearbox |
|
A brushed aluminium gear box so no more broken gear housings, built in cooling fins to take the heat from the motor, reducing the risk of an overheated motors The gearbox has a 10mm x 10mm mounting box and is a direct replacement for E-flite and GWS planes, a 6.6:1 gear ratio installed, 5.3:1 & 4.4:1 gears included for flexible power management.
Supplied with a dual ball bearing mounted hardened output shaft for efficient and durable operation and perfect gear mesh. |
| HFL3015 |
Complete Gearbox with motor & additional gear sets |
|
|
| |
 |
|
Gear Set |
|
| A complete set of three different ratios all with purple aluminium centre boss and gears made of heavy-duty glass filled nylon for true running and messing of gears for strength and maximum efficiency. |
| HFL3020 |
Gear set 6.6:1, 5.3:1 & 4.4:1 |
|
|
| |
 |
|
Gear Box Shaft |
|
| A replacement shaft for the Flightline gearbox, and a stronger replacement for E-flite and GWS gearboxes, supplied with complete hardware for installation. |
|
|
| |
 |
|
Gear Box and Gear Set |
|
A brushed aluminium gearbox that will except 24mm motors (370) w/2mm output shafts complete with three different gear ratios.
6.6:1, 5.3:1 & 4.4:1 all gears have a purple centre hub for added durability secured to the output shaft via a grub screw, and the pinions are made from brass. |
| HFL3022 |
Gearbox & Gear set only. |
|
|
