The most popular engine mounts around made of glass filled nylon for added strength ideal for two stroke and four stroke engines. They feature grooved back plates to accept fixed nose legs and are suitable for upright, inverted or sidewinder engine installation.

A range of glass filled nylon beam engine mounts, the mounts are moulded in two interlocking pieces and allow for up to 6mm sideways adjustment to take a wide range of model engines. The range comprises mounts for 20-48, 50-80,60-120, and 120-180 engines respectively, and come complete with socket cap bolts and captive nuts.

Thrust wedges offer a simple solution to engine incidence changes.

These fuel tanks are moulded in strong, lightweight nylon supplied with a durable glass filled nylon cap and back plate with a leak-free rubber stopper. Also included are the brass clunk weight, pre-bent brass fuel tubing and a length of silicon tubing. Available in a range of sizes from two fluid ounces up to twenty fluid ounces.

Fed up with oily residue on the side of your models? Well these exhaust deflectors from Flightline will help to solve that problem by deflecting most of the exhaust away from the fuselage sides. Made from heat resistant silicone, angled at forty-five or ninety degrees, and available in red, grey, yellow, blue, and purple, they come complete with nylon zip ties for secure fixing, and are designed to fit over the outlet pipes of most glow engines from 20 size to 140 size.

General-purpose fuel tubing made from semi- translucent tubing so that the fuel is visible inside it. Also available as a pack containing four one metre lengths of hi-visibility Fluorescent coloured tubing. The fuel tubing has a thick wall design to prevent kinks.

A simple idea, but highly effective at retaining fuel tubes on carburettors, tanks and silencer nipples, just squeeze to open the spring clip, slip over the fuel tube, once in place simply release and forget.

Instead of using a screw or bolt to blank off your filling line use a specially designed nylon bung that stay attach to you tubing so you don’t loose your bung on the floor. Available in red and yellow.

Available in packs of two, these top quality fuel filters reduce the risk of dead stick engines caused by either a blockage of the fuel line or carburettor due to unfiltered fuel, they are a machined aluminium two-piece design that may be dismantled for cleaning of the filter mesh.

A complete set of plated fittings that enable any metal or plastic container to be converted into an efficient fuel caddy for fuelling models. Each set contains a fuel probe, fuel probe holder, fuel pick up clunk with filter, and illustrated instructions for fitting into the container caps.

Fuel line plugs in packs of two provide the perfect solution to blocking off the fill and empty tube from the fuel tanks in models, no more need to use screws, or bits of dowel etc, and the knurled finger grip makes them easy to use.

Tidy tank filler, avoids untidy fuel tube hanging from a model for refuelling. Fasten this moulding in the fuselage or cowl side and obtain access to the fuelling line. Snapping the cover shut seals the line and leaves an inconspicuous streamlined form.

A two- way-fuelling valve that may be mounted on the cowl or fuselage side of model aircraft and enables filling and emptying fuel tanks without having to remove the tube to the carburettor, or have unsightly tubing hanging from the model.
This aluminium valve fits between the carburettor and fuel tank and the leak proof fuel probe enables filling to be done cleanly and easily.

This complete remote glow plug system allows the glow plug to be ignited from the fuselage sides or cowling on many different types of model. It provides a safe and neat fixing, and it may be mounted in an easily accessible position keeping glow plug igniters away from the engine. Each unit is complete with a rubber cap lead, mounting bracket, screws, and glow plug sized voltage pickup. A replacement cap lead (HFL6076) is available as a spare part.