SITE NAVIGATION

TAZER ESC RANGE

   
Tazer 15T Forward/Reverse ESC

TAZER MINI BRUSHED WATERPRROF ESC


Operation Forward/Reverse with Smart Brake,
Forward Only with Brake
Input Voltage 4- to 7-cell (4.8–8.4 volts) DC
Peak Current 300A
Continuous Current 30A
Full-On Resistance 0.004 ohms
Frequency 1 kHz
BEC output 5.6V DC, 1 amp max.
Motor Limit 370 motor, 20 turn;
380 motor, 22 turn
Overload Protection Thermal, Stall, Over-Voltage
Dimensions (LxWxH) 41mm x 34mm x 14mm
(1.61 in x 1.34 in x 0.55 in)
Weight 36 g (1.27 oz)


Click to download a manual of the Tazer Brushed ESC

Tazer 15T Forward/Reverse ESC

TAZER 15T FORWARD/REVERSE ESC


The Tazer 15T can handle a wide variety of motors from stock to 15-turn limited modifieds, Setup is push-button simple and it comes prewired with universal Tamiya and bullet connectors.

FEATURES
  • High power, proportional FET control
  • High-frequency operation for smooth speed transitions
  • Thermal overload protection
  • Push-button programming
  • Prewired connectors

ESC SPECIFICATION  
Forward: Yes
Reverse: Yes
Brake: Yes
Time Delay Brake: Yes
Continuous Maximum Current: 250 amperes
Input Voltage: 4-cell (4.8 volts) to 7-cell (8.4 volts) DC Ni-MH 2S
(7.4 volts) Li-Po
Length: 1.25 in (38.6mm)
Width: 1.02 in (26.2mm)
Height: .888 in (22.5mm)
Weight: 1.2 oz (34 g)
PWM Frequency: 2kHz
Overload Protection: Yes Thermal
Full On Resistance: 0.0014 ohms
Cells w/BEC: 5V DC, 1 amp max.

DYN4925 TAZER 15T FORWARD/REVERSE ESC

TAZER WATERPROOF 15 TURN BRUSHED ESC

TAZER 15T FORWARD/REVERSE WATERPROOFESC

ESC SPECIFICATION  
Forward: Yes
Reverse: Yes
Brake: Yes
Time Delay Brake: Yes
Continuous Maximum Current: Forward: 30A, Reverse: 15A
Input Voltage: 4.8-8.4V (4- to 7-cell)
Input Connector Types: EC3
Output Connector Types: 3.5mm bullet
Motor Limit: 15T
Momentary Peak Current: Forward: 300A, Reverse 150A
Length: 1.83 in (46.4mm)
Width: 1.45 in (36.9mm)
Height: 1.10 in (28.3mm)
Weight: 2.7 oz (76 g)
BEC Voltage: 5.6V
Auto Cutoff: Yes







DYN4925WP TAZER WATERPROOF 15 TURN BRUSHED ESC

Tazer 12T Forward/Reverse ESC

TAZER 12T FORWARD/REVERSE ESC


Forward/Reverse Electronic Speed Control for Stock through 12-Turn Brushed Motors

FEATURES
  • Fully proportional forward and reverse with braking delay
  • Simple push-button setup
  • Economical upgrade to handle high-powered modifieds
  • Prewired motor and battery leads, including connectors
  • Lightweight, compact size takes less chassis space
  • Motor limited to 12 turns

ESC SPECIFICATION  
Forward: Proportional Forward
Reverse: Proportional Reverse
Brake: Yes
Time Delay Brake: Yes
Continuous Maximum Current: 46A
Input Voltage: 4-6cells 4.8-7.2V
Input Connector Types: Tamiya
Output Connector Types: Bullet
Motor Limit: 12 Turns
Momentary Peak Current: 900A
Length: 38.6mm (1.25 in)
Width: 26.2mm (1.02 in)
Height: 22.5mm (0.89 in)
Weight: 34g (1.2 oz)
BEC Voltage: 5V @ 1A
Overload Protection: Thermal

DYN4927 TAZER 12T FORWARD/REVERSE ESC

Tazer 12T Forward/Reverse ESC

TAZER 12T WATERPROOF FORWARD/REVERSE ESC


ESC SPECIFICATION  
Forward: Yes
Brake: Yes
Time Delay Brake: Yes
Continuous Maximum Current: Forward: 38A, Reverse: 19A
Input Voltage: 4.8 - 8.4V
Input Connector Types: EC3
Output Connector Types: 3.5mm Bullet
Motor Limit: 12T
Momentary Peak Current: Forward: 380A, Reverse: 190A
Length: 1.83 in (46.4mm)
Width: 1.45 in (36.9mm)
Height: 1.1 in (28.25mm)
Weight: 2.7 oz (76g)
BEC Voltage: 5.6V
PWM Frequency: 1 kHz
Full On Resistance: 0.0028 ohm

DYN4927WP LIPO TAZER 12T WATERPROOF FWD/REV ESC

Tazer 10T Forward/Reverse ESC

LIPO TAZER 10T FORWARD/REVERSE ESC


The Dynamite Li-Po Tazer represents an evolution of the Tazer ESC series.  With features like push-button programming and thermal overload protection, this ESC provides peace of mind knowing that setup and safety are taken care of right out of the box. The Li-Po Tazer also provides reverse operation and smart braking which applies the braking function of the ESC in the event the reverse is initiated while the vehicle is moving forward, protecting your vehicle's transmission. As an added safety feature, the Li-Po Tazer has a built-in low voltage cutoff to help protect and extend the life of your Li-Po batteries. Not using Li-Po's? No problem, the Li-Po Tazer is backward compatible and can utilize Ni-MH packs as its primary power source as well.

FEATURES
  • Compatible with Li-Po, Ni-MH and Ni-Cd battery types
  • Thermal overload protection
  • Push button programing makes setup a breeze
  • Smart braking system helps prevent transmission damage
  • High frequency design delivers smooth speed transition

ESC SPECIFICATION  
Forward: Yes, Proportional
Reverse: Yes, Proportional
Time Delay Brake: Yes
Continuous Maximum Current: 250A
Input Voltage: 4.8–8.4V Ni-MH, 7.4V Li-Po
Input Connector Types: Tamiya
Motor Limit: 10T
Momentary Peak Current: 1000A
Length: 1.25 in (38.6mm)
Width: 1.02 in (26.2mm)
Height: 0.89 in (22.5mm)
Weight: 1.2 oz (34g)
BEC Voltage: 5V DC, 1 amp max
PWM Frequency: 2kHz
Overload Protection: Thermal
Full On Resistance: 0.0014Ω

DYN4928 LIPO TAZER 10T FORWARD/REVERSE ESC

 
  • TAZER MINI SURFACE ESC AND RECEIVER UNIT
    DYN4901
    TAZER MINI SURFACE ESC AND RECEIVER UNIT
  • TAZER MINI SURFACE SERVO WITH SERVO SAVER
    DYN4905
    TAZER MINI SURFACE SERVO WITH SERVO SAVER
  • TAZER MINI SURFACE SERVO SAVER SET
    DYN4906
    TAZER MINI SURFACE SERVO SAVER SET
  • TAZER 280 MINI SURFACE MOTOR WITH MOUNTING HARDWARE
    DYN4921
    TAZER 280 MINI SURFACE MOTOR WITH MOUNTING HARDWARE
  BACK TO START OF SECTION GO TO TOP