Castle Creations
XXX-CR
specification

Motor/speedo combinations:

4600 Package MMBMAX-CMS4600
5700 Package MMBMAX-CMS5700
6900 Package MMBMAX-CMS6900
7700 Package MMBMAX-CMS7700

Cells:

6-12 NiCad/NiMH or 2-3s LiPo

Continuous:

100 amps

Brake:

Proportional

Reversible:

Yes - with lockout

Low Voltage Cut-off:

Programmable

ESC Size:

48x33x30.5mm (1.9 x 1.3 x 1.2")

Motor Size:

35.5mm dia x 43mm (1.4" dia. x 1.7")

ESC Weight with wires:

70.9 g (2.5 oz)

Motor Weight:

198.4g (7.0 oz)

Connector Type:

Universal
Castle Side Winder Micro

MAMBA MAX 1/10TH SCALE EXTREME BRUSHLESS POWER SYSTEM


Castle Creations Mamba Max system is the top system for racing. Providing all the power and precise control needed at the top end of racing the system allows for the smallest of changes to be made to the speed controllers program by interfacing with the Castle Link PC programming software. This means that you don’t have to settle for a pre-set on a program, you can adjust and fine tune the settings to extract the maximum performance but in the configuration that best suits your application and driving style. The program can be installed onto a laptop and taken to the track for quick and easy set up changes also, allowing for even more fine set up control to gain those extra seconds on track that make all the difference in the end.
Here is a short list of the things that can be customised using the Castle Link™ program;
  • Infinitely adjustable throttle and brake curves
  • Punch Control to dial in the horsepower just where you want it
  • Brake Strength to keep you tracking straight under hard braking,
  • Drag Brake to help corner entries
  • Start Power for true and smooth launches
  • Cutoff voltage to keep your LiPo batteries happy
  • Timing Advance for that final tweak in performance

Once the setting is just right for the application, the setting can be saved and shared amongst other Mamba Max racers! Nothing comes close to the power, speed and flexibility that the Mamba Max system offers.
The Mamba Max system doesn’t use a fan to keep cool, its durable construction combined with excess capability give a speed controller that will not break. You can run pack after pack at the track and it will take it without having thermal issues. Some of the advantages to running brushless as opposed to brushed;

  • Insane speeds easily possible
  • Easy setup, easy to use.
  • Crazy long run times
  • No hassle installation
  • No brush maintenance