• Easily installs and removes springs that secure exhaust header to engine and
  tuned pipe to header
  
• Heat-treated steel hook holds springs precisely without deflection
  
• Aluminium cover with O-ring closure prevents accidental harm

The Team Losi A99168 Clutch Tool all but eliminates the pinched fingers and aggravation associated with working on the clutch shoes and springs of a .21 to .30 engine. This handy clutch tool has a pivoting arm with an extra long metal flap that holds the clutch shoe and retracts the spring for removal. The arm can also be flipped over to correctly position/push the shoe on while retracting the spring during installation. The Team Losi clutch tool is lightweight and compact easily fitting in your tool kit. All 1/8 scale on-road and off-road racers as well as big block monster truck owners will find this tool a must have.

• Lightweight, easy-to-use design
  
• Installs and removes clutch springs and shoes quickly and safely
  
• Compact design

Losi’s Temp-Tuner is the single most important tool for every Nitro owner’s toolbox! The term “two tools in one” applies to the Temp-Tuner, as it incorporates both a temperature gauge and a tuning screwdriver into one tool.

Monitoring the temperature of your nitro engine is critical for its performance and well-being. The Temp-Tuner features a state-of-the-art infrared, non-contact temperature gauge with a special silicon ring to ensure you position the gauge at the same location each time you check the temperature level of your car’s engine. The temperature gauge will measure temperatures of -27°F to 428°F, and can be set to measure in either Fahrenheit or Celsius.

Spin the tool around and you have yet another precision tool, a high quality racer-designed tuning screwdriver, long enough to get into the smallest areas. The precision ground tip is wide, with the correct taper for making the finest needle adjustments with confidence.

• State-of-the-art infrared non-contact temp gauge measures -27° to 428°F
  
• Special silicon ring ensures consistent positioning when checking
  engine temperature
  
• Racer-designed screwdriver is long enough to reach small areas