Headsink

MIP Headsink for O.S. .12R / .12Z / .12CV: MIP HEADSINKS were specifically designed for 1/10th scale off-road racing. They come predecked from the factory, and include a top of the line #8 McCoy plug. The MIP HEADSINK allows for more accurate and easier tuning since the Head comes up to race temperature faster than standard Heads. MIP HEADSINKS come anodised

MIP On-Board Temp2 Gauge

Knowing the temperature of your gas engine is vitally important to keep it well running and long living. The MIP On-Board Temp2 Gauge fastens directly onto the gas engine heat sink and delivers continuous, and incredibly accurate temperature readings. MIP's unique features include a Loop probe sensor which can be used on any engine, a large LCD screen, new ON/OFF button for longer battery life, a Centigrade/Fahrenheit button, and our new clear lexan splash guard.

Rear Stinger Exhaust Systems

MIP 360 Stinger Kit for Associated, HPI, Losi, and Traxxas: The only exhaust system that sounds like a real 2 stroke engine. For use with or without pull starts, the 360 Stinger has all the horse power and top end of an on-road pipe, but creates the torque and punch on the bottom end needed for off-road. The 360 Stinger comes anodised and includes a custom shock tower, and header hose & ties.

Side Pipe Exhaust Systems

1/10th scale Side Pipe Kits for Touring Cars, and Gas Trucks: The same race winning technology that developed the 360 Stinger Kit has now produced the highest quality side headers, and pipes. MIP's high performance Side Pipe Kits include a header, a side pipe, and hardware. Headers and pipes are also sold separately.

1/10th Scale Nitro Flywheels

MIP Flywheels for RC-10GT:
MIP has designed two distinctly different flywheels for non-pull start engines. The first is the lightweight, purple anodised, aluminium flywheel. Designed for ultimate horsepower this flywheel increases low end torque, while greatly increasing overall top speed. Next, the heavyweight flywheel is made of steel, and was designed for loose slick tracks, where control and maximum traction are essential. Both flywheels are manufactured with the option of using the MIP 4-N-1 clutch, or Team Associated two and four shoe clutches.

MIP Flywheel for Losi GTX:
This new lightweight flywheel for the GTX greatly increases low end torque, while also improving overall top end speed. It is manufactured from high grade T6 aluminium that has been anodised red, and features pressed in solid alloy clutch pins.

MIP Flywheel for Traxxas T-Maxx:
The new Heavyweight flywheel is manufactured of steel to increase traction, smooth out the truck's powerband, and help the engine idle much more consistently.

1/10th Scale Clutch Systems

MIP Clutch Systems for Team Associated, Team Losi, HPI, and Kyosho vehicles: They are specially designed with our custom extension spring to be run in various settings for precision tuning They are also manufactured of MIP high grade composite material which allows for the smoothest and most consistent transfer of power MIP Clutch Systems are stock replacements

HPI M3015       MIP Clutch Kit for RS-4 / RS-4Nitro Mini M3040       Replacement Clutch Springs for RS-4 and RS-4 Nitro Mini (2)  Kyosho M3051       Quad Rider Clutch Kit M3052       Replacement Clutch Springs for Quad Rider (2)   Team Losi M3026       MIP 2-N-1 Clutch for Losi GTX / NXT / XXXNT M3035       Replacement Clutch Springs (2)   Team Associated M3012       MIP 4-N-1 Clutch Kit for RC-10GT M3034       Replacement Clutch Spring (2) M3068       Clutch Kit for TC3 Nitro RTR M3076       Clutch Kit for TC3 Nitro M3077       Replacement Clutch Spring for TC3 Nitro (2) M3091       Clutch Kit for RC10GT RTR   Traxxas M1602      Clutch Kit for Traxxas Revo M3069      MIP Clutch Kit for Nitro 4-Tec M3071      MIP Clutch Kit for T-Maxx M3072      Replacement Clutch Spring for (T-Maxx) (2) M3078      Clutch Kit for (T-Maxx) (2)

Boost Bottle and Rear Boost Chamber Kits

MIP Boost Bottle and Rear Boost Chamber Kits increase your 12 or 15 gas engine's bottom end acceleration while making the power band more constant than ever before Both kits fit 12 OS, CV, CZ, Dynamite, Thunder Tiger, and Traxxas engines

1:10 Truck Parts

The Traxxas REVO is the latest hot truck from the company that originated the Monster truck, MIP have released a range of replacement parts that add strength and reliability.
All the parts are machined from the best materials available and to the closest tolerances to make sure that they fit first time and enhance the reliability and handling of the truck.