This shop uses cookies. If you stay on this page, you agree to our Cookie Policy. I agree

HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF

Item no.:  094HAN4630
HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 1
HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 2
HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 3
HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 4
HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 5
HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 6
HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 7
HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 8
HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 9
HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 1HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 2HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 3HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 4HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 5HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 6HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 7HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 8HORIZON Hangar 9 P3 Revolution 60cc 1980mm ARF - Image 9
Manufacturer: Hangar 9
Hangar 9
Availability:(Delivery time: in stock, 3-4 days)
604,79 GBP
incl. VAT and excl. shipping
Pcs
The Hangar 9® P3 Revolution 60cc giant scale biplane is an exclusively licensed model of the radical new aircraft design for Skip Stewart Airshows. Like the full-size, the outline of the P3 Revolution 60cc is unconventional in practically every aspect. The actual aircraft Skip Stewart will fly in the very near future gets its lightweight specifications from advanced composite construction. World-class RC pilot, Mike McConville, has engineered this model using lightweight all-wood construction. It’s a level of durability that’s critical to hardcore 3D performance in this size class, plus it allows genuine UltraCote® film to deliver a finish that’s resilient as it is beautiful.

One look at the enormous double-beveled control surfaces and it’s easy to tell this airplane was purpose built for outrageous 3D maneuverability. In contrast, the stretched fuselage and high-aspect ratio of its tapered wings suggests precision aerobatics is within the performance envelope. When matched with the recommended Spektrum electronics and 60cc-size gas engine, you can tune this unique biplane any way you like. You’ll get vertical pull to yank this big bipe out of a hover, and the precision to wail through crank-shaft rollers and hard snap in ways that would red-eye any pilot in the full-scale world.

Convenience features like plug-in wings and stabilizers mean that getting the P3 Revolution to the field is no problem. Completed features like factory-hinged ailerons and elevators, a pre-drilled firewall, and a complete high-quality hardware package mean you won’t be at the work bench very long. Even a pilot figure with the likeness of Skip Stewart is included so you can experience the future of airshow aerobatics right at your home field.

Exclusive License
The P3 Revolution 60cc model is produced with an exclusive license by Skip Stewart Airshows and features the same complex graphics as the original with a Genuine UltraCote® film finish. To top it off, even the included pilot figure looks like Skip Stewart.

Mike McConville Design
World class RC pilot, Mike McConville designed this model to offer breakthrough performance to 3D pilots looking for the advantages an advanced biplane design can deliver.

Plug-in Wings and Tail
The two-piece, plug-in wings feature carbon-fiber joiner tubes and tool-free I-strut installation. The two-piece, plug-in horizontal stabilizers also have a carbon-fiber joiner tube and simply bolt to the fuselage side.

Highly Pre-Fabricated
The all-wood structure features lightweight laser-cut construction with locations for all the accessories already cutout. To further speed the assembly process, hinges for the aileron and elevators have been factory installed.

Fiberglass Cowl and Wheel Pants
The fiberglass cowl and wheel pants color match the vibrant trim scheme. The landing gear is fabricated from high-strength aluminum and also have a matching black paint finish.

Complete Hardware Package
The high-quality hardware pack features heavy-duty ball-link connectors and dual-plate fiberglass control horns that help make final pushrod adjustments simple. Even the fuel tank is included.

Features

  • Designed by world class RC pilot, Mike McConville
  • Exclusive, officially licensed P3 Revolution model
  • Engineered to deliver 3D performance in a precision biplane platform
  • Two-piece, plug-in wings with carbon-fiber joiner tube
  • Two-piece, plug-in horizontal stabilizers with carbon-fiber joiner tube
  • Laser-cut, all-wood construction that’s lightweight
  • Pre-hinged ailerons and elevators (pre-drilled rudder)
  • Genuine UltraCote® film finish with complex graphics applied
  • Pre-drilled firewall that’s ready to mount your 60cc-size gas/petrol engine
  • Color-matching fiberglass cowl and wheel pants
  • Painted, high-strength aluminum landing gear
  • Complete, high-quality hardware pack, plus fuel tank included
  • Ball-link connectors and dual-plate fiberglass control horns
  • Painted pilot figure included

Needed To Complete

  • 6+ Channel, full-range transmitter and receiver
  • 60–70cc 2-stroke gas/petrol engine
  • 7 × High torque servos
  • 2 × Standard servos
  • 3 × Batteries for radio and engine ignition
  • 4.5-Inch spinner
  • Propeller
Specification:
Wingspan approx.: 1982 mm
Fuselage length approx.: 2000 mm
Wing area approx.: 1172,30 dm²
Weight (ready to fly): 8600 - 9500 g
Type of construction/material wing: Balsa
Type of construction/material fuselage: Balsa
Type of construction/material cowling: GFK
Type of construction/material wheel pants: GFK
RC-Function/accessory recommendation:
Aileron: 4x DS-X TG HV
Elevator: 2x DS-X TG HV
Siderudder: 1x DS-X TG HV
Motor: 2x DS 5100 MG
Needed to complete:
Radio: min. 6-Channel
Receiver: min. 6-Channel
Motor: Evolution 62GX
Servos: 7x DYMOND DS-X TG HV , 2x DYMOND DS 5100 MG
Propeller: 22 x 8" - 24 x 10"
Spinner: 114 mm / 4,5 in
Batteries: 2x LiPo 2000mAh
Servos for this item:
DYMOND DS 5100 MG digital Servo
Item no.: 03119032
Availability:(Delivery time: in stock, 3-4 days)
DYMOND
15,88 GBP
incl. VAT
and excl. shipping
Pcs
DYMOND DS 9900 BB MG digital Servo (coreless)
Item no.: 03119003
Availability:(Delivery time: currently not available)
DYMOND
37,72 GBP
incl. VAT
and excl. shipping
Pcs
DYMOND DS 9995 TG HV digital Servo
Item no.: 03119019
Availability:(Delivery time: currently not available)
DYMOND
41,92 GBP
incl. VAT
and excl. shipping
Pcs
DYMOND DS-X TG HV brushless digital Servo (alu housing)
Item no.: 03119034
Availability:(Delivery time: in stock, 3-4 days)
DYMOND
67,12 GBP
incl. VAT
and excl. shipping
Pcs
Spektrum A6220 HV Dig Low-Profile Hi-Torque MG Aircraft SX
Item no.: 094SPMSA6220
Availability:(Delivery time: in stock, 3-4 days)
Spektrum
79,79 GBP
incl. VAT
and excl. shipping
Pcs
Drives for this item:
Evolution 3 Wire Ignition/Rx Switch
Item no.: 094EVOA112
Availability:(Delivery time: in stock, 3-4 days)
Evolution
8,39 GBP
incl. VAT
and excl. shipping
Pcs
Ultra Fuel Pump (Manual Gas & Glow)
Item no.: 094HAN155
Availability:(Delivery time: in stock, 3-4 days)
Hangar 9
16,79 GBP
incl. VAT
and excl. shipping
Pcs
HORIZON Evolution 62GX 62ccm Single-Cylinder Gas Engine
Item no.: 094EVOE62GX
Availability:(Delivery time: in stock, 3-4 days)
Evolution
462,00 GBP
incl. VAT
and excl. shipping
Pcs
Transmitter / Receiver for this item:
Spektrum LiPo Receiver Pack 2000mAh
Item no.: 094SPMB2000LP
Availability:(Delivery time: in stock, 3-4 days)
Spektrum
62,15 GBP
incl. VAT
and excl. shipping
Pcs
Spektrum DX9 9-Channel DSMX single transmitter (multimode)
Item no.: 094SPMR9900EUC
Availability:(Delivery time: currently not available)
Spektrum
277,19 GBP
incl. VAT
and excl. shipping
Pcs
Spektrum TM1000 DSM2 Full Range Aircraft Telemetry Module
Item no.: 094SPM9548C
Availability:(Delivery time: in stock, 3-4 days)
Spektrum
58,80 GBP
incl. VAT
and excl. shipping
Pcs
other Accessories for this item:
DYMOND epoxy glue 5min 200g
Item no.: 0319752
Availability:(Delivery time: in stock, 3-4 days)
DYMOND
7,98 GBP
[39,90GBP/kg]
incl. VAT
and excl. shipping
Pcs
Activator for cyanoacrylate
Item no.: 0319750
Availability:(Delivery time: in stock, 3-4 days)
DYMOND
3,28 GBP
[21,87GBP/Liter]
incl. VAT
and excl. shipping
Pcs
DYMOND cyanoacrylate glue medium (20g)
Item no.: 02575142
Availability:(Delivery time: in stock, 3-4 days)
DYMOND
3,35 GBP
[167,50GBP/kg]
incl. VAT
and excl. shipping
Pcs
Propeller / Spinner for this item:
Mejzlik 22 x 8'' CfK Propeller (2 Blatt)
Item no.: 2132208
Availability:(Delivery time: in stock, 3-4 days)
Mejzlik
50,32 GBP
incl. VAT
and excl. shipping
Pcs
Mejzlik 24 x 10'' CfK Propeller (2 Blatt)
Item no.: 2132410
Availability:(Delivery time: in stock, 3-4 days)
Mejzlik
57,04 GBP
incl. VAT
and excl. shipping
Pcs
Parts List for this item:
Hangar 9 P3 Revolution 60cc: Painted Landing Gear
Item no.: 094HAN463011
Availability:(Delivery time: currently not available)
Hangar 9
28,55 GBP
incl. VAT
and excl. shipping
Pcs
Item no.: 094HAN463012
Availability:(Delivery time: in stock, 3-4 days)
Hangar 9
13,43 GBP
incl. VAT
and excl. shipping
Pcs
Item no.: 094HAN463005
Availability:(Delivery time: in stock, 3-4 days)
Hangar 9
100,79 GBP
incl. VAT
and excl. shipping
Pcs
Item no.: 094HAN463007
Availability:(Delivery time: in stock, 3-4 days)
Hangar 9
20,99 GBP
incl. VAT
and excl. shipping
Pcs
Item no.: 094HAN463010
Availability:(Delivery time: in stock, 3-4 days)
Hangar 9
66,35 GBP
incl. VAT
and excl. shipping
Pcs
Hangar 9 P3 Revolution 60cc: Pilot Figure (painted)
Item no.: 094HAN463025
Availability:(Delivery time: currently not available)
Hangar 9
17,63 GBP
incl. VAT
and excl. shipping
Pcs
Item no.: 094HAN463009
Availability:(Delivery time: in stock, 3-4 days)
Hangar 9
40,31 GBP
incl. VAT
and excl. shipping
Pcs
Item no.: 094HAN463001
Availability:(Delivery time: currently not available)
Hangar 9
361,20 GBP
incl. VAT
and excl. shipping
Pcs
Item no.: 094HAN463002
Availability:(Delivery time: in stock, 3-4 days)
Hangar 9
48,71 GBP
incl. VAT
and excl. shipping
Pcs
Item no.: 094HAN463006
Availability:(Delivery time: currently not available)
Hangar 9
88,19 GBP
incl. VAT
and excl. shipping
Pcs
Item no.: 094HAN463014
Availability:(Delivery time: in stock, 3-4 days)
Hangar 9
20,99 GBP
incl. VAT
and excl. shipping
Pcs
Item no.: 094HAN463016
Availability:(Delivery time: in stock, 3-4 days)
Hangar 9
26,87 GBP
incl. VAT
and excl. shipping
Pcs
Item no.: 094HAN463003
Availability:(Delivery time: currently not available)
Hangar 9
201,59 GBP
incl. VAT
and excl. shipping
Pcs
Item no.: 094HAN463004
Availability:(Delivery time: currently not available)
Hangar 9
184,80 GBP
incl. VAT
and excl. shipping
Pcs
Item no.: 094HAN463008
Availability:(Delivery time: in stock, 3-4 days)
Hangar 9
35,28 GBP
incl. VAT
and excl. shipping
Pcs