Prices incl. VAT and excl. shipping
  GBP 114.99
Add to Wish List
Out of Stock

The 80-amp Pro SB brushless ESC with switch-mode BEC and advanced programming allows you to operate up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage.

Categories

Image for 80-Amp Pro Switch-Mode BEC Brushless ESC, EC5 (V2) from Horizon Hobby
+ / - Hover over image to Zoom
80-Amp Pro Switch-Mode BEC Brushless ESC, EC5 (V2) 80-Amp Pro Switch-Mode BEC Brushless ESC, EC5 (V2)
  • Overview
  • Specs
  • Parts & Accessories
  • Manuals & Support

Key Features

  • Up to 80 amps continuous current with proper air flow and 100 amps burst current (15 seconds)
  • 5V switch-mode BEC capable of 5 amps continuous current with 6 amps max burst on any recommended input voltage
  • Drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage
  • 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
  • Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  • Programmable soft start-up rate - .25 second or 1 second
  • Auto motor shut down if signal is lost or there is interference
  • Programmable timing—5 user-selectable ranges–use with a large variety of brushless motors
  • Two operating modes–Airplane or Heli
  • Pre-wired connectors—E-flite EC5 on battery input and 4.0mm female gold bullets on motor output leads
  • NOTE: Not recommended to use with E-flite Power 60 Brushless Outrunner (EFLM4060B)

Overview

When performance matters in your high-current applications, look no further than the E-flite® 80-amp Pro switch-mode ESC. This is a high-quality, efficient sensorless brushless electronic speed control with an integrated switch-mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. It is capable of up to 80 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage. Featuring an exposed, finned heat sink aluminum case with lightweight plastic end-caps, safe power-arming along with advanced programmable features such as low voltage cutoff, braking, timing, throttle input range and more, the E-flite 80-amp Pro switch-mode ESC is truly a ‘pro series’ electronic speed control.

This product is not intended for use by children under 14 years of age without direct adult supervision.

Amperage: 60 & Up
Auto Cutoff: Yes
BEC Continous Current: 5A
BEC Voltage: 5.5V Switch-mode
Brakes: Yes
Cells w/BEC: 9-18 cells NiMH, 3-6S LiPo
Forward: Yes
Input Connector Types: EC5, 10AWG leads
Momentary Peak Current: 100A (15 seconds) Proper Cooling Required
Output Connector: 4mm Gold Bullet, 12AWG leads
Overload Protection: Yes
Time Delay Brake: Yes

Parts Listing

Price pending
This item is no longer available
Unavailable

Optional Accessories

GBP 4.50
Out of Stock
GBP 8.99
Out of Stock
GBP 7.50
In Stock
GBP 8.99
Out of Stock
GBP 20.16
This item is no longer available
Unavailable
GBP 3.99
Out of Stock

Manuals

FAQs

Product Support Tips

Product Support

Product Support & Service

Technical questions about this product should be directed to Horizon Hobby:

Horizon Hobby GmbH
Hanskampring 9
D-22885 Barsbuettel
Deutschland

US Product Support:
Mo - Fr: 2:00pm - 9:00pm (UK Time zone hours of operation)
English: +44 (0) 127 929 7061

Europe Customer Service & Tech Support:
Mo - Fr: 8:00am - 4:00pm
English: +44 (0) 127 929 7061
German: +49 (0) 40-822167800
French: +33 (0) 7 822 63 500

To submit a Horizon Hobby Service Ticket please visit our Service Ticket Form.

If you would like to purchase this product at a local retailer please visit our Store Locator.