This shop uses cookies. If you stay on this page, you agree to our Cookie Policy. I agree


Item no.:  013304700
AERONAUT Alex - Image 1
AERONAUT Alex - Image 2
AERONAUT Alex - Image 3
AERONAUT Alex - Image 4
AERONAUT Alex - Image 5
AERONAUT Alex - Image 6
AERONAUT Alex - Image 1AERONAUT Alex - Image 2AERONAUT Alex - Image 3AERONAUT Alex - Image 4AERONAUT Alex - Image 5AERONAUT Alex - Image 6
Manufacturer: aero-naut
Availability:(Delivery time: in stock, 3-4 days)
162,73 GBP
incl. VAT and excl. shipping
Multi-task vessel: working and research boat

The ALEX is a non-scale model of a modern 14 m multi-task boat. The model is based on a modern planing hull, and is therefore very fast and agile. The hard-chine hull is of plastic construction. All the ABS parts are supplied laser-cut, and can be slotted together and glued immediately.
The hull is assembled on a Depron jig. The power system consists of two electric motors which can either be controlled individually (2 x Multi 25 speed controller) or in common by a single Multi 40 controller. Two rudder systems are used for directional control. The A-mast towards the stern can also be servo-operated. The towing mechanism is rugged enough to tow other boats.
The wheelhouse is assembled completely from mahogany components. The etched instrument panel components make it possible to illuminate the large number of instruments. All the model’s lamps can be lit using 3 mm LEDs. The searchlight is assembled from ready-made etched parts, and is fully articulated. The reflector and LED are carefully matched, and produce an exceptionally powerful, accurately focussed beam of light.

The model can be further expanded at the builder’s discretion, since plenty of space is available in the hull for additional working systems such as bow thruster, lighting, sound effects or winches.

The model kit contains:

All laser-cut ABS parts required to build the model, Depron jig, fittings and propeller shafts, motor mounts and rudders.
The extensive set of etched nickel-silver components contains more than a hundred parts, including railing stanchions, searchlight, working door hinges, panel instruments, ventilator panels and much more.
Length: 717 mm
Beam: 200 mm
Weight: 2400-3000 g
Box contents:
Accessories built-in/included: Liegt bei
RC-Function/accessory recommendation:
Motor: ESC
Rudder: 1x DYMOND DS 1550
Needed to complete:
Radio: Min 2 CH
Motor: Brushed Race 650
ESC: 40 A Brushed
Servos: 1x DYMOND DS 1550
Batteries: 6V PB
Charger: DYMOND B6 EVO V2
accessories for this item:
Activator for cyanoacrylate
Item no.: 0319750
Availability:(Delivery time: in stock, 3-4 days)
3,55 GBP
incl. VAT
and excl. shipping
DYMOND cyanoacrylate glue thin (20g)
Item no.: 02575140
Availability:(Delivery time: in stock, 3-4 days)
3,62 GBP
incl. VAT
and excl. shipping
Stabilit Express 80g
Item no.: 02570174
Availability:(Delivery time: currently not available)
18,09 GBP
incl. VAT
and excl. shipping
Currently not available

aero-naut at Staufenbielaero-naut at Staufenbiel

Find the best and latest RC-products by aero-naut at Staufenbiel online.

You can buy low-priced aeronaut RC products and aeronaut RC accessories at the onlinestore of Staufenbiel on and them also can be ordered by phone. Even with questions around the model-constructions and about aeronaut your Staufenbiel-team is available by phone ((0049) 040 300 619 50) or by e-mail ( We offer you competently advice and excellent customer support around (aero-naut) modelmaking.

You will also find many of our R/C products, various accessories and helpful qualified salespersons in our model shop in Barsbuttel (near Hamburg), as well as in our model store in Hamburg Othmarschen and in our Staufenbiel shop in Berlin. Look at our models closely and be advised on site. We look forward to your visit!