The legend lives on!
Sold and tried a 1000 times, unsurpassed in the price-performance
relation. After the HAWK and the HAWK V2, there is now the third
generation of the series: the HAWK III REVOLUTION. With numerous new
improvements and a unique, unmistakable look, the hotliner with
preinstalled motor and wired servos comes for the very first time also
as a PNP version. Anyone who appreciates a high-quality and perfectly
matched, yet still affordable hotliner, probably will not be able to do
without this model anymore.
The HAWK III REVOLUTION is a genuine hotliner with T-tail, as were its
two predecessors. Depending on the drive, the racer can easily reach
speeds of more than 250 km/h meanwhile it still stays safely on its
track. Yet, owing to its stable structure, it can also chase through
any conceivable aerobatic flight manoeuvre.
The model is completely built as high-quality full composite
construction with elaborate mould varnishing. It is equipped with
numerous carbon fibre reinforcements that guarantee stability also in
case of rough landings. The one-piece wing is likewise provided with
For the first time, a Staufenbiel model in full composite design is
available as a PNP version with installed electronics! Besides a
high-performance X-MAX cased outrunner, 3 Dymond digital servos with
metal gear are installed and wired in the model. A black anodised
aluminium spinner and the original CAM-carbon folding propeller round
out the PNP variant. Unpack, complete the final assembly, and race off.
For all those who would rather equip their model according to their
standards and preferences, the HAWK III of course continues to be
available as ARF variant without electronics.
Short assembly time
Both versions of the HAWK III REVOLUTION reach a very high degree of
prefabrication. Furthermore, the PNP version includes an aluminium
spinner and folding propeller. The matching servo covers and all
required small parts are included in the delivery for both versions.
The model has readily milled-out air inlets in the fuselage nose and an
outlet in the rear section. This ensures optimal cooling of the drive.
Owing to the optimised fuselage, the longitudinal dihedral is now
around 0 degrees, which guarantees an absolutely neutral flight
behaviour, even at maximum speeds.
The new fuselage of the HAWK III was reinforced with carbon fiber in
critical places. On the inside of the fuselage walls, carbon stripes
are fitted over the entire length of the fuselage. In addition,
reinforcements are underneath the wing retainers. Thus, the hotliner is
much more stable and robust during scorching flight manoeuvres and can
also handle harder landings.
NEW: More space
The significantly larger and already milled-out fuselage opening under
the wing retainers enables easy access to the battery, motor and
The new landing skid on the bottom of the fuselage ensures a maximum of
stability and protects the HAWK III also in rough landings.
We listened! The predecessor, the Hawk V2, has been criticised often
because the bright blue predecessor model was difficult to see in the
high speeds. This is changed now. Because the HAWK III REVOLUTION is
mould-varnished with fluorescent colours. The sporty varnish in neon
yellow, and the neon green in combination with black offer excellent
visibility. The colours practically sting the eye even in dusk. The
block stripes on the bottom side of the wings furthermore indicate the
orientation of the model to the pilot at any time.
- High-speed, high-performance hotliner with great flight
- Short assembly time owing to the high degree of
- Mould-varnished, neon-coloured fuselage
- Air hoods in the fuselage for the cooling of the drive
- Carbo fiber-reinforced fuselage with large fuselage opening
underneath the wing
- 1-piece varnished glass-fibre reinforced wing with carbon
- MH-30 airfoil for maximum speed
- Control with elevator, aileron and motor
- High-performance, Dymond X-MAX X36-L800 cased outrunner
motor installed (PNP version only)
- 3x DYMOND DS 1550 MG digital servos with metal gear
installed and wired (PNP version only)
- Including black anodised aluminium spinner and CAM carbon
folding propeller (PNP version only)
- Including servo covers and linkage accessories
- Detailed User Manual with lots of pictures in German,
English and French
More Information about the HAWK III REVOLUTION here