The Minihawk has reached
its third generation!
We have made what was good even better.
With its 132cm wingspan the new Minihawk III may be considerably
smaller than the Hawk III but in terms of flight performance it is
absolutely equal. Our full composite hotliner can reach speeds of up to
250 kmh. The optimized angle of attack gives the MiniHawk III
very neutral flight characteristics and the full composite structure
makes it tough and rugged, ready to withstand high forces.
Just like its predecessor it is built completely out of high quality
composite materials and is painted in neon colors in the mold.
Optimized angle of attack
Our test pilots have put extra effort into finding the perfect angle of
attack so it is perfect out of the box. No trimming is needed and the
little pocket rocket is neutral on the elevator in the entire speed
Carbon fiber reinforcement
Just like its big brother, the Hawk III, we have reinforced
the Minihawk III through and through with carbon fiber. These numerous
reinforcements ensure that the robust airframe can take even the most
stressful flight maneuvers.
Molded landing skid
The molded landing skid protects the fuselage when landing in rough
terrain. Like its predecessor, the latest version also has this
practical feature, which additionally stiffens the fuselage on the
Wide speed range
Whether you want to go fast or slow, the MiniHawk III is
always easy to control. Using the stock setup you can reach a top speed
of more than 200kmh in horizontal flight so it is guaranteed to be huge
fun for everyone who is looking for a pocket sized hotliner that not
only boasts a high-quality design but is also easy to fly without
making compromises concerning speed.
Gap-free control surfaces
All control surfaces already been provided with fillets
during the molding process. These fillets close the gap of the
elastoflap control surfaces on deflection optimizing aerodynamics.
Easy battery access
Unlike many other hotliners, you do not have to disassemble the
MiniHawk III’s wing to change the battery pack. The LiPo pack
can easily be changed through the small cockpit canopy. This makes
changing the pack quick and easy and you are ready to take off again in
Pre molded grip and center
of gravity (CoG) marking
Our developers went one step further to make the MiniHawk
III an elaborate model. The fuselage has a pre formed grip making the
model easy to hold and preventing it from slipping during hand
launching. We have also marked the correct CoG on the fuselage so there
is no need to take the manual to the field anymore. Balancing
the model on our CoG marking will immediately show you if the model is
nose or tail heavy.
Pre-milled air inlets
All air inlets have been pre milled at the factory saving you time,
work and that pesky fiberglass dust.