Throughout the 2016 racing season Team Losi Racing Team and engineering
staff was always evolving their chassis setups on the TLR®
8IGHT™ 4.0. All of this culminates into the 2017 TLR Tuning
Kit for the 8IGHT 4.0 buggy. Using our racing team and development
staff we have further improved the 8IGHT platform for a more reliable
and faster race buggy. The key improvements allow the buggy improved
the handling on bumpy tracks, enhanced braking, and improved
durability. This TLR tuned kit allows the consumer to purchase all of
the same parts that were used by our race team at the IFMAR 2016 World
Championships and into the 2017 racing season. Here is why we came out
with each part.
Lighter weight and more flex for a more responsive vehicle in bumpy
conditions. With this chassis the gear box now has the ability to move
3mm forward, in conjunction with the included offset rear adjustable
hinge pin braces, to give the rear end less bone angle for less
mechanical bind which allows the car to adapt quicker to rough terrain.
Heavy Duty Brake Pads and
Completely new 100% CNC design now keeps the brake disc true with the
out drive and minimizes the possibility for it to skew. Now the brake
plates have material glued in for a much more stronger and consistent
brake feel after a hour long main event.
Front and Rear Universals
Reduce the mechanical bind in the drive train to allow the suspension
to adapt to the surface quicker.
New front aluminum spindles are required with the front universals to
allow for the correct bearing depth. These also add significant
durability to the most vulnerable part of the car if it comes under
Gen II Wing Mount
This new wing mount allows for the new polycarbonate or the standard
plastic wing to be used by allowing 5-40 srews, aluminum support
washers and nuts to secure it to the mount, but as an added feature you
can install the new ( included) machined post to continue to use the
body clip method for attaching the wing to the mount.
A new polycarbonate high down force wing is much lighter than the
traditional composite wing, when installed it brings the buggys center
of gravity creating a stable buggy around high speed tracks. This wing
also generates more down force for more rear traction, but can be tuned
out by simply opening holes to reduce the drag.
Magnetic Wheel Nuts
The new TLR wheel nuts include a steel screw and nut in the center
which holds to our new magnetic TLR wheel wrench (wrench not included).
This makes tire changes during main events much faster and minimizes
risk of loosing a nut during a tire change.
High Downforce Body
This body is an all new design that compliments the new polycarbonate
high downforce wing, while the cab and front side pods have more
surface area for greater front traction and steering. The body, in
combination with the wing, provides a more stable buggy.
Clamping Servo Saver Nut
This new nut directly replaces the stock nut and now uses a clamping
feature via a screw. This removes the chances of the servo saver nut
backing off during long main events.